low teg

[chaunce]

hey i have a 96 integra on tokiko luminas and tokiko springs megan racing control arms. how much farther should i go. id like to redo all the bushings. anything other than that to make it handle like a champ

[B16aRS]

If you want it to handle get a ITR sway bar and some type of subframe brace.

[chaunce]

sway bars already in forgot to list it and any recomendations?

[Capt'n Obvious]

ebay extended top hats
rta bushings will make a diff

[v-tecivic]

ebay extended top hats
rta bushings will make a diff

with those trailing arm bushings. a good thing to do is clock them, or turn them slightly before fully pressing them in. that way once your car is sitting on the pavement, and lower than stock, your bushings will have less tension on them, making them last longer. get oem or the harder mugen ones.

[Capt'n Obvious]

with those trailing arm bushings. a good thing to do is clock them, or turn them slightly before fully pressing them in. that way once your car is sitting on the pavement, and lower than stock, your bushings will have less tension on them, making them last longer. get oem or the harder mugen ones.

good but no need to press just wwack it out and wack it in with a hammer 4door i think put up a diy on here

[chaunce]

alright thanks guys. if anything else hits ya lemme know

[eh2_Erik]

Buddy Club N+ coilovers lol

Seriously tho, get strut bars maybe a spring with a stiffer spring rates. turn them illuminas up to 5 and TIRES!

Tires are the most important part. Falken Azenis are grippy tires, but they have a low tread wear of 200 so they'll wear very fast.

[chaunce]

strut bars are in front and rear. luminas are on 5 too lol i dont think im going to replace springs and tires stay nice but thank you