96 civic hatch swaybar/exhaust issues

Midori · Post by **Midori** » Tue Jan 29, 2008 4:28 pm

well i finally decided to see what you guys have to say about my on going exhaust issue. I have the ASR subframe brace which puts my 22mm rear swaybar about another inch outward from the subframe, well the rear section of my exhaust comes down and sits right on the swaybar, it rattles alot but mostly i just dont like the fact that its sitting on there, i want everything to be free flowing down there.

any suggestions / know of any exhausts that have a huge rear section bed to clear my swaybar and then some, cause i want to upgrade!

deetz · Post by **deetz** » Tue Jan 29, 2008 4:35 pm

pull the exhaust down and lightly dent it.. it wont hurt the performance..

HondaChild · Post by **HondaChild** » Tue Jan 29, 2008 9:14 pm

deetz;94074 wrote:pull the exhaust down and lightly dent it.. it wont hurt the performance..

Its a really nice exhaust system, why ruin it?

Josh maybe we can look at it and weld a custom axle back that has a hump to go around the sway bar.

deetz · Post by **deetz** » Tue Jan 29, 2008 9:25 pm

HondaChild;94125 wrote:Its a really nice exhaust system, why ruin it?

Josh maybe we can look at it and weld a custom axle back that has a hump to go around the sway bar.

you fucking ricers.... all you guys care about is how shit looks... news flash.. its under the car.. noone is gonna care if ya dent it in just a bit so it clears...:reddot:

HondaChild · Post by **HondaChild** » Tue Jan 29, 2008 9:27 pm

deetz;94127 wrote:you fucking ricers.... all you guys care about is how shit looks... news flash.. its under the car.. noone is gonna care if ya dent it in just a bit so it clears...:reddot:

actually I care, I bet he cares. If you go to resell it and it has a big ass dent in it, it most likely wont sell very well now will it?????

Capt'n Obvious · Post by **Capt'n Obvious** » Tue Jan 29, 2008 9:32 pm

my exhaust hangers on the hyungai are adjustable, but if yours is not take a ziptie and on the mount there should be a rubber thing connecting the hanger on the exhaust to the hanger on the car. just pull it up and ziptie it tight but maybe your hangers are diffrent than mine but i beleive thats how most exhaust is hung.

p.s. subframe brace> exhaust

pics?

deetz · Post by **deetz** » Tue Jan 29, 2008 9:33 pm

HondaChild;94128 wrote:actually I care, I bet he cares. If you go to resell it and it has a big ass dent in it, it most likely wont sell very well now will it?????

so your telling me.. when ya look to buy a car.. you climb under it and look up and down the exhaust pipe and make sure theres no SMALL DENTS in it?:PDT_Armataz_01_33: just stop where you're at...

HondaChild · Post by **HondaChild** » Tue Jan 29, 2008 9:36 pm

deetz;94131 wrote:so your telling me.. when ya look to buy a car.. you climb under it and look up and down the exhaust pipe and make sure theres no SMALL DENTS in it?:PDT_Armataz_01_33: just stop where you're at...

I wasn't talking about selling the car now was I? I was reffering to the exhaust.:kermit:

Capt'n Obvious · Post by **Capt'n Obvious** » Tue Jan 29, 2008 9:38 pm

deetz;94131 wrote:so your telling me.. when ya look to buy a car.. you climb under it and look up and down the exhaust pipe and make sure theres no SMALL DENTS in it?:PDT_Armataz_01_33: just stop where you're at...

dude, most people like to make stuff look good cuz even if noone will see it they will.

i think he means if he sells the exhaust fool

now stop argueing girls jk

Midori · Post by **Midori** » Tue Jan 29, 2008 10:10 pm

deetz;94127 wrote:you fucking ricers.... all you guys care about is how shit looks... news flash.. its under the car.. noone is gonna care if ya dent it in just a bit so it clears...:reddot:

youre telling me that im a ricer because i dont want to dent the FUCK out of My 550 dollar exhaust? i think you saying that its under the car, who cares? is a ricer statement in itself, who the fuck wants to beat shit with a hammer to make it work? ricer? i think so.

i removed my exhaust. put one a highclow cat onto my CX edhaust manifold, and skunk2 mid section without the S bend, there is no rear section. this equals no bent ass exhaust and no sway bar hitting.. im buying Buddy club exhaust, thanks for the intersting covo.