Some one help? po6 ecu on h22a?

1.6 crx si · Post by **1.6 crx si** » Sun Apr 24, 2011 4:28 pm

I have a h22a eg but the vtec seems to not be working. It's just a very mellow increase in rpm..no crossover what-so-ever. So first thing I did was check over the wiring and it seems to be correct with good connections. I worked my way down to the ecu and noticed it was a po6 ecu.. for a civic 1.5 non vtec...I assume this would be my problem correct?

The other thing is I popped the ecu open and it has a "demon" chip inside? No nothing about it, or if that should make the po6 acceptable. If anyone heard of this ecu working for a h22a then I suppose i'll look into it being the sillinoid?

Someone please help or atleast give your opinion.

Thanks

Waffles · Post by **Waffles** » Sun Apr 24, 2011 4:40 pm

A P06 can be converted to a p28 and run a h22 with vtec with no issues. A couple people on here could burn you a acceptable base map. If you are still having issues with the ecu after that hook a volt meter up to the ecu pin and have a friend watch while driving.

Phate · Post by **Phate** » Sun Apr 24, 2011 4:41 pm

Who did the swap? You should talk to them.

1.6 crx si · Post by **1.6 crx si** » Sun Apr 24, 2011 4:52 pm

Phate;262738 wrote:Who did the swap? You should talk to them.

Not a good idea..The swap was done very well. Looks good, no hoopty wires every where, and seems to be wired correct. So im not even sure the guy I bought it from did the swap like he said. My reason for saying this is because when i texted him "why cant i hear crossover"? His reply was "you cant hear crossover with aftermarket exhaust"....Soooo, that was the end of asking him.

1.6 crx si · Post by **1.6 crx si** » Sun Apr 24, 2011 4:58 pm

Waffles;262737 wrote:A P06 can be converted to a p28 and run a h22 with vtec with no issues. A couple people on here could burn you a acceptable base map. If you are still having issues with the ecu after that hook a volt meter up to the ecu pin and have a friend watch while driving.

I will have access to a p13 tomorrow. If I throw that ecu in and I have vtec does that mean the po6 was chipped wrong or something? sorry for lack of knowledge.

Redline · Post by **Redline** » Sun Apr 24, 2011 10:22 pm

is it a white eg hatch with h22 swap, it so i know who did the swap

1.6 crx si · Post by **1.6 crx si** » Mon Apr 25, 2011 12:06 am

Redline;262758 wrote:is it a white eg hatch with h22 swap, it so i know who did the swap

Nope its a dark grey eg

Fzn14 · Post by **Fzn14** » Sun May 01, 2011 10:58 pm

Redline;262758 wrote:is it a white eg hatch with h22 swap, it so i know who did the swap

Thats me :multi: lol

crxfornow · Post by **crxfornow** » Mon May 02, 2011 5:31 pm

run the p13 then tell us what is going on