In Need of a Good Tune

riceROCKET · Post by **riceROCKET** » Thu Jan 27, 2011 3:28 am

. ...so I have a 90 crx si with a b16a swap and few add ons. in need of some info about the best software and tuning for my car. Any sugestions??

92_luder · Post by **92_luder** » Thu Jan 27, 2011 3:33 am

p28..hondata

riceROCKET · Post by **riceROCKET** » Thu Jan 27, 2011 3:56 am

...which computer is that? wha does it come out of?? who can tune it for me??

2ksi · Post by **2ksi** » Thu Jan 27, 2011 5:54 am

buy a p28 and ill chip it for you for a small fee. when that is done, a buddy of mine (boosted_da) can street tune it at what his costs might be.

the p28 is a stock obd1 computer that can be chipped and tuned. they come out of a 92-95 civic ex/si. you dont need to blow your money on a hondata when you can get the same results from chipping it on the side. my ecu is chipped and has a reflash on it. boosted_da did the street tune and its working out great. i get awesome gas mileage and it runs great all around. afr's are all good, not too rich nor lean.

rickles8099 · Post by **rickles8099** » Thu Jan 27, 2011 5:52 pm

if he ges a p28 to use, he will have to convert to obd1.

92_luder · Post by **92_luder** » Thu Jan 27, 2011 5:57 pm

isnt there like a conversion harness...i think its like 100 bucks or somethin in that range

rickles8099 · Post by **rickles8099** » Thu Jan 27, 2011 5:59 pm

92_luder;254882 wrote:isnt there like a conversion harness...i think its like 100 bucks or somethin in that range

and then youll have to get a four wire o2 sensor and an obd1 distributor in addition to the p28 and obd0 to obd1 conversion harness.

2ksi · Post by **2ksi** » Thu Jan 27, 2011 7:52 pm

i got my conversion harness for $30. its a yonaka harness and it does me good. why would he have to get the other distributor and 4 wire o2 sensor though?

Boosted_da · Post by **Boosted_da** » Fri Jan 28, 2011 12:39 am

rickles8099;254883 wrote:and then youll have to get a four wire o2 sensor and an obd1 distributor in addition to the p28 and obd0 to obd1 conversion harness.

+1 he is right. unless you already have a obd1 harness in the car what do you have to control your vtec? is it through the ecu or do you have a vasfc?

riceROCKET · Post by **riceROCKET** » Fri Jan 28, 2011 3:42 am

Boosted_da;254907 wrote:+1 he is right. unless you already have a obd1 harness in the car what do you have to control your vtec? is it through the ecu or do you have a vasfc?

. ..I don't have anything controlling my v-tec now. and on te p28 com. does it matter if it cam off of a single cam vehicle?? would that have any factor in the tune?