prelude axles?

sloaccord20 · Post by **sloaccord20** » Sun Feb 03, 2008 4:22 pm

i was wonder ing if anybody knew if the prelude axles(92-96) will fit in a my 94 accord
the main deal is the length of it from the trany to the hub didn't know if they were longer or shorter

i know that the tranys will fit already swaped trany and swaped back after turboing my car

rickles8099 · Post by **rickles8099** » Sun Feb 03, 2008 4:42 pm

94 accord axle

95 prelude axle

they have different part numbers which means they are different parts. i would say no.

sloaccord20 · Post by **sloaccord20** » Sun Feb 03, 2008 4:54 pm

alot of time the only reason they have a different part # is that it is for a different car but not all the time

rickles8099 · Post by **rickles8099** » Sun Feb 03, 2008 4:59 pm

sloaccord20;95171 wrote:i've alot of time the only reason they have a different part # is that it is for a different car but not all the time

different part numbers means different parts. the same part number means its the same part.

sloaccord20 · Post by **sloaccord20** » Sun Feb 03, 2008 5:01 pm

and i know that the half shafts are different on the axle input

an abs and non abs have a different part number but they both work in my car since i don't have abs
thats why i'm just sayin because they have a different part number doesn't mean that they won't work or fit

big pipe · Post by **big pipe** » Sun Feb 03, 2008 6:43 pm

ive been reading about that, the prelude axles are about 1/4" longer than the accords. they WILL work. they just stick out of the hub a little:sign17:
make sure you stay auto to auto, or manual to manual, youll be fine

96civic cr-v · Post by **96civic cr-v** » Sun Feb 03, 2008 7:12 pm

what happen tony did u break another one???

sloaccord20 · Post by **sloaccord20** » Sun Feb 03, 2008 7:38 pm

big pipe;95191 wrote:ive been reading about that, the prelude axles are about 1/4" longer than the accords. they WILL work. they just stick out of the hub a little:sign17:
make sure you stay auto to auto, or manual to manual, youll be fine

thanx thats what i was wanting to know

96civic cr-v;95193 wrote:what happen tony did u break another one???

not yet just been looking for axle swap that will be a little stronger than what i got and not spend 500 or more

ls1slayer · Post by **ls1slayer** » Sun Feb 03, 2008 10:22 pm

$500 is that drive shaft shop axels?

sloaccord20 · Post by **sloaccord20** » Sun Feb 03, 2008 10:37 pm

ls1slayer;95236 wrote:$500 is that drive shaft shop axels?

yes and i heard that they aren't very good