b16 trans to short for interstate driving??

User avatar
RyanA
Posts: 2492
Joined: Mon Dec 25, 2006 9:51 pm

b16 trans to short for interstate driving??

Post by RyanA »

To me, it got annoying after a while. I drove from my house to St Louis on I44 and I was ready to be out of the car when I got home. We were turning 5000+ almost the whole way there and back.
91b16Adx
Posts: 51
Joined: Sun May 27, 2007 9:22 pm

b16 trans to short for interstate driving??

Post by 91b16Adx »

Digital Sol;50946 wrote:@ 80 im over 5k rpms....loud...and vtec is just a gas pedal tap away lol
same here. i find it annoying as hell cause its so loud, but it makes passin people easy since your practically already in vtec..
User avatar
Spork
Posts: 6680
Joined: Thu Nov 16, 2006 12:52 am

b16 trans to short for interstate driving??

Post by Spork »

I <3 my LS transmission...
This post comes with a guarantee: I guarantee that I don't care what you think about it.
lilryan
Posts: 20
Joined: Sat Feb 24, 2007 5:13 am

b16 trans to short for interstate driving??

Post by lilryan »

i turn over 4000rpms on the highway as well. but my vtec engages at 3200 so i just cruise in vtec. power is always on tap, no mater what gear i am in.
hx swapped dx saloon
300k_CB7
Posts: 43
Joined: Sat Sep 29, 2007 7:43 am

b16 trans to short for interstate driving??

Post by 300k_CB7 »

I can almost assure the engine has no problems with the revs. The B's love to rev. Personally, I think 3800-4500 is their "sweet spot, " and they're certainly engineered for the speeds.

But it's definitely a personal preference. I've installed several LS 5th gear sets for B16 tranny owners who got annoyed with the exhaust "hum" after a while.
User avatar
Lotek
Posts: 341
Joined: Fri Dec 01, 2006 3:00 am

b16 trans to short for interstate driving??

Post by Lotek »

N2HIFI;50311 wrote: actually i get about 32mpg driving 75mph at 4200 rpm.
chris
Ive been wanting to use that the next time i get pulled over goin to school. its an honest excuse.

i drive 200miles a week to and from school, 100 to and from work, and another 150 or so around town(live in st. chuck, go to school at forest park, and work in old lake saint louis).

i do 65 to 85 for all of that sept around st chuck and i get about 30mpg avg. there is only 150rpm diffrence between 60 and 70. and 90 is about 4200. i drive alot on page to school thus the high speeds. but 40 is a mess and screws up the fuel consumption.

i drive this very regular and i have no problems to speak of.
Signature removed please contact any moderator.
6363527779
:hippy:
Digital Sol
Posts: 697
Joined: Sat Nov 25, 2006 9:22 pm

b16 trans to short for interstate driving??

Post by Digital Sol »

edited
User avatar
2nrsOfSpringfield
Posts: 53
Joined: Wed Dec 05, 2007 10:51 pm

b16 trans to short for interstate driving??

Post by 2nrsOfSpringfield »

we put GSR 5th gear sets in almost every b16 tranny we get into. Not only will it pull the RPMs down, it will also help you get better MPG
User avatar
civicex442
Posts: 951
Joined: Sun Dec 17, 2006 12:56 am

b16 trans to short for interstate driving??

Post by civicex442 »

i hate my gsr tranny. the gears are nice when i wanna play, but suck for every day driving. you gotta pay to play though
Image
98 EJ6
03 WRX
User avatar
Liquor Assassin
Posts: 927
Joined: Sun Feb 25, 2007 7:05 pm

b16 trans to short for interstate driving??

Post by Liquor Assassin »

my rpms are around 4500 at 70, but its actually QUIETER at that rpm mostly due to the fact that i have a ctr crank pully that reaches a certain resonance at that rpm and all the rattles and vibrations kind of melt away, also im willing to turn the other cheek on higway driving when i remember that i have a little thing called lsd
Image
Member #1 of stl honda's classic car club