Electrical BS
-
92_luder
- Posts: 1003
- Joined: Tue Nov 16, 2010 2:36 pm
Electrical BS
So my passenger side headlights arent working....high or low.....driver works fine...........the passenger side fuse is fine......but im not gettin power to my hid ballasts at all.......what could i b missing?
cop:did you see that stop sign?
stop sign......what stop sign?
stop sign......what stop sign?
-
92_luder
- Posts: 1003
- Joined: Tue Nov 16, 2010 2:36 pm
Electrical BS
real cute, thanks bro....Waffles;265407 wrote:an E
cop:did you see that stop sign?
stop sign......what stop sign?
stop sign......what stop sign?
-
STLWagovan
- Posts: 38
- Joined: Fri Apr 15, 2011 6:38 pm
Electrical BS
I assume ( since i dont know who you are, and you neglected to say what you have) that you have an aftermarket HID kit on your 92 prelude?
If you have not power getting to the ballast, trace the wire to find the break in the line?
Also check your grounds.
I assume you are checking the "power" line with a multimeter ( DMM - digital multi meter) - what voltage are you seeing?
If you have not power getting to the ballast, trace the wire to find the break in the line?
Also check your grounds.
I assume you are checking the "power" line with a multimeter ( DMM - digital multi meter) - what voltage are you seeing?
-
92_luder
- Posts: 1003
- Joined: Tue Nov 16, 2010 2:36 pm
Electrical BS
STLWagovan;265429 wrote:I assume ( since i dont know who you are, and you neglected to say what you have) that you have an aftermarket HID kit on your 92 prelude?
If you have not power getting to the ballast, trace the wire to find the break in the line?
Also check your grounds.
I assume you are checking the "power" line with a multimeter ( DMM - digital multi meter) - what voltage are you seeing?
i was checkin with a test light...and i thought about it being a break in the wire but does that jus happen....shouldnt there b symptoms for a breakin wire......dim light, sometimes not coming on and other times theyre fine....?
cop:did you see that stop sign?
stop sign......what stop sign?
stop sign......what stop sign?
-
Fzn14
- Posts: 136
- Joined: Fri Oct 31, 2008 3:12 pm
Electrical BS
I would buy a meter and actually see what the voltage is there if any...not to mention it will tell you if you have a good ground going threw the system or not. Even though the fuse looks good, that isnt always thew case.
-
92_luder
- Posts: 1003
- Joined: Tue Nov 16, 2010 2:36 pm
Electrical BS
thanksFzn14;265442 wrote:I would buy a meter and actually see what the voltage is there if any...not to mention it will tell you if you have a good ground going threw the system or not. Even though the fuse looks good, that isnt always thew case.
cop:did you see that stop sign?
stop sign......what stop sign?
stop sign......what stop sign?
-
STLWagovan
- Posts: 38
- Joined: Fri Apr 15, 2011 6:38 pm
Electrical BS
You didnt answer my question tho..
1) Is this an aftermarket system?
2) Where is the fuse located?
3) How long have you had this system in the car?
I would check the ground for the ballast / bulb.
(To Test with a Test Light) Put your test light on the positive side of the battery, then test the ground spot. It should light up if the ground is good.
1) Is this an aftermarket system?
2) Where is the fuse located?
3) How long have you had this system in the car?
I would check the ground for the ballast / bulb.
(To Test with a Test Light) Put your test light on the positive side of the battery, then test the ground spot. It should light up if the ground is good.
-
92_luder
- Posts: 1003
- Joined: Tue Nov 16, 2010 2:36 pm
Electrical BS
i found the short thanks for those of you who helped.
problem solved !!!:occasion18:
problem solved !!!:occasion18:
cop:did you see that stop sign?
stop sign......what stop sign?
stop sign......what stop sign?
