engine start cel d16z6

blueandy
Posts: 57
Joined: Mon May 03, 2010 2:40 pm

engine start cel d16z6

Post by blueandy »

Hey , got a quick or maybe long question. Drove to work yesterday, one and a half mile drive, no problems. Got off work, tried to start it, wouldn't start. Cranked over no problem, but wouldn't start. Finally got it to start and got home to run a jump across the harness. Check engine code 43 came up. Looked that shit up, and it said possibly 02 sensor, or fuel system problem. What does anyone think, maybe fuel pump or fuel filter or o2? I run a d16z6
luvmyhondas
Posts: 1615
Joined: Tue Nov 06, 2007 3:41 am

engine start cel d16z6

Post by luvmyhondas »

did it act like a main relay no start?

cranked fine, but wouldn't run...then after a couple tries the fuel pump kicked on and car started/ran just fine.
AKA audioguru76
The faster I go, the broker I get!
79 Hondas and counting!
blueandy
Posts: 57
Joined: Mon May 03, 2010 2:40 pm

engine start cel d16z6

Post by blueandy »

yea kinda like that. Turned key over, no start. turned key, over no start. Turn key back over, let it sit to see if i could hear the fuel pump, no start. Did it again it started. When it did try to start, it would start for a split second, then die. You could smell a bit of fumes too.
bbranson
Posts: 3
Joined: Thu May 06, 2010 5:44 am

engine start cel d16z6

Post by bbranson »

check if the pump is running when the key is on. if its not then its more than likely the main relay.