B16 hp

User avatar
v-tecivic
Posts: 978
Joined: Mon Nov 20, 2006 9:35 pm

B16 hp

Post by v-tecivic »

i would do some suspension mods. i did that before i started gathering turbo parts and i found my car to be quite fun to drive despite the lack of ballsy power. im not turbo'd yet but i will be soon.
Image
97 civic ex turbo
13.1@112
User avatar
v-tecivic
Posts: 978
Joined: Mon Nov 20, 2006 9:35 pm

B16 hp

Post by v-tecivic »

JDM EM1;221346 wrote:yeah if ur wanting to go turbo later, don't waste money on intake, header, exhaust (2.5" or less) etc. You'll just be wasting money. Save up on a turbo and just run around on stock b16 b/c as we all know b16 sucks for n/a and make no power without putting TONS of money in to it.

but for now what will benefit you later for turbo that could you actually put on your car now would be getting a walbro 255 high flow fuel pump. You can put this in the car now with no need to tune the car. You can get your oil pressure gauge and actually hook the oil pressure gauge up now, Really about sums up what would be worthy to get now that you could actually put on and be ready for turbo later and won't be out any money on n/a stuff.

Oh yeah and you could get your oil pan tapped now and just throw a block off plug on it, so your ready for that as well.

now search and find good turbo parts for you car untill you have them all =)
tapping the pan before he has his manifold and turbo might turn into a problem with figuring out the oil return line. i had a fitting welded to a spare pan i had before i bought the manifold im going to use. when i was mocking my block/turbo setup, i found out it wont line up at all.
Image
97 civic ex turbo
13.1@112
JDM EM1
Posts: 444
Joined: Sat Sep 26, 2009 4:41 am

B16 hp

Post by JDM EM1 »

v-tecivic;221348 wrote:tapping the pan before he has his manifold and turbo might turn into a problem with figuring out the oil return line. i had a fitting welded to a spare pan i had before i bought the manifold im going to use. when i was mocking my block/turbo setup, i found out it wont line up at all.
sounds like you need to move the turbo around on the manifold so the return hole from turbo is pointed in the proper directrion or find you a different return line ;-)

i had mine tapped before I was turbo'd and everything lined up perfectly fine with no problems.
User avatar
erming
Posts: 93
Joined: Fri Dec 25, 2009 10:05 pm

B16 hp

Post by erming »

As far as suspension I do have new bilstein shocks and h&r springs that's about it
User avatar
99BlackHatch
Posts: 8654
Joined: Thu Nov 09, 2006 5:45 am

B16 hp

Post by 99BlackHatch »

Spork;221337 wrote:b16 will never have big balls, sorry.
Quoted for truth
I'm still a neighborhood ASSHOLE!

SquadronOne.net
Image
- 1996.5 Black Acura 3.5RL - Kouki front end conversion coming... Wait. DID IT!
- 2004 Carbon Gray Pearl Acura 3.5RL - Slammed, JDM headlights, Navigation, other fun stuff
JustRob
Posts: 7884
Joined: Sat Nov 18, 2006 7:28 pm

B16 hp

Post by JustRob »

Not another one of these fucking threads. Doesn't anyone use the search button.
Spork;221337 wrote:b16 will never have big balls, sorry.
99BlackHatch;221365 wrote:Quoted for truth
Fail. You both hate them because you did it wrong...

Image

;)
JustRob
Posts: 7884
Joined: Sat Nov 18, 2006 7:28 pm

B16 hp

Post by JustRob »

JDM EM1;221350 wrote:sounds like you need to move the turbo around on the manifold so the return hole from turbo is pointed in the proper directrion or find you a different return line ;-)

i had mine tapped before I was turbo'd and everything lined up perfectly fine with no problems.
It depends on if you're running an A/C or non-A/C compatible manifold and how the manifold is designed (Top mount, log, mini-ram, ram horn, etc.)

Sounds like you just got lucky.
User avatar
erming
Posts: 93
Joined: Fri Dec 25, 2009 10:05 pm

B16 hp

Post by erming »

At least someone said the b16 isnt a waste, by the way how much boost are you pushing? and what kind of power are you making??
User avatar
gsrauto98
Posts: 1930
Joined: Fri Oct 10, 2008 10:42 pm

B16 hp

Post by gsrauto98 »

erming;221420 wrote:At least someone said the b16 isnt a waste, by the way how much boost are you pushing? and what kind of power are you making??
that build is gone....and his motor was somewhat built
JDM EM1
Posts: 444
Joined: Sat Sep 26, 2009 4:41 am

B16 hp

Post by JDM EM1 »

erming;221420 wrote:At least someone said the b16 isnt a waste, by the way how much boost are you pushing? and what kind of power are you making??

who?

b16's aren't a waste if you boost them.

mines bone stock with 142,000+ miles on 8psi making 250-270whp. It runs good for what it is. Its fun little street car now.