help

User avatar
CRXFreak
Posts: 569
Joined: Tue Mar 04, 2008 1:01 am

help

Post by CRXFreak »

ok well i have my lsvtec in and everything hooked up but for some reason the injectors arent working, i have the right injectors. im pretty sure all my grounds are hooked up, 1 from the valve cover to the chassis, 1 from the starter to the chassis and one from the battery to the chassis, and the one on the thermostat housing, if im missing any please let me know where they are supposed to go. i know its getting fuel into the fuel rail. the timing is right as far as i can tell everything is hooked up and all the fuses i have checked are good. any ideas on what this could be would great.
User avatar
Gunmetal Si
Posts: 3312
Joined: Thu Nov 09, 2006 10:59 pm

help

Post by Gunmetal Si »

look. do u have a dmm? u need to check and make sure u have voltage.
User avatar
CRXFreak
Posts: 569
Joined: Tue Mar 04, 2008 1:01 am

help

Post by CRXFreak »

ok no i dont have a dmm and what am i supposed to be checking for voltage
User avatar
andyjt
Posts: 3524
Joined: Thu Nov 16, 2006 10:40 pm

help

Post by andyjt »

CRXFreak;157376 wrote:ok no i dont have a dmm and what am i supposed to be checking for voltage
Check for power and the injectors in the Run position and when cranking...
-Andrew-
'01 V6'ed Acura Integra Type R
'00 Honda Civic Si
'91 BMW 850i
User avatar
Phate
Posts: 4601
Joined: Sun Jan 21, 2007 6:12 am

help

Post by Phate »

If you want, you can come up to my work tomorrow and borrow my voltage tester.
Midmomofo Built.
If you can't take a joke, FU.
Have an issue? Email me. .
Image
User avatar
CRXFreak
Posts: 569
Joined: Tue Mar 04, 2008 1:01 am

help

Post by CRXFreak »

ok thanks guys everyone, ill check that tomorrow when i get off and see how it turns out, i dont think the injectors are getting power tho or wouldnt they be working like they should? but im gonna check anyway just to make sure
User avatar
CRXFreak
Posts: 569
Joined: Tue Mar 04, 2008 1:01 am

help

Post by CRXFreak »

just as i thought there is NO power getting to the injectors
User avatar
andyjt
Posts: 3524
Joined: Thu Nov 16, 2006 10:40 pm

help

Post by andyjt »

CRXFreak;157556 wrote:just as i thought there is NO power getting to the injectors

Do you have all of the ecu connectors plugged in?
3-at the ECU
1- green plug to the body at the ECU
1- at the drivers side of the car?
-Andrew-
'01 V6'ed Acura Integra Type R
'00 Honda Civic Si
'91 BMW 850i
User avatar
HardCore97
Posts: 2590
Joined: Thu Nov 30, 2006 10:57 pm

help

Post by HardCore97 »

the three plugs at the ecu are hooked up as well as the green plug but idk about the plug on the drivers side ive never looked at anything over on that said