true that, when tuning the cavalier, it was running rich, so he just kept turning the knob until it leaned out a bit, pretty convenient if you ask me(his is ran into the car). remember, youre never too rich, you just need more boost!:rambo:big pipe;50368 wrote:i ran a turbo xs hi performance mbc on my wrx it was by far the easiest to install mod i ever did to that car. every turn of the screw is 1 psi...that screw became my best friend (until i blew the motor)
Boost controller
-
bildo16
- Posts: 1983
- Joined: Wed Jan 03, 2007 1:45 am
Boost controller
Project CAFE RACER in progress!!!
-
niket
- Posts: 22
- Joined: Sun Jul 15, 2007 10:52 pm
Boost controller
if cheap is waht you're looking for then i'd suggest a manual boost controller. some of the good ones like hallman or turboxs (high performance variant) are very accurate and do not cause boost spikes.
the advantage with electronic, say the apexi avc-r, is you can have gear dependent boost. this way you can tune it to give you less boost and therefore more traction in first, then full boost in 2nd - 5th gears.
general rule is not to boost more than 2x the wastegate spring. so if its a 7psi spring, don't go over 14psi total. good luck
the advantage with electronic, say the apexi avc-r, is you can have gear dependent boost. this way you can tune it to give you less boost and therefore more traction in first, then full boost in 2nd - 5th gears.
general rule is not to boost more than 2x the wastegate spring. so if its a 7psi spring, don't go over 14psi total. good luck
-
boostedb16rex
- Posts: 137
- Joined: Tue Nov 28, 2006 10:10 pm
Boost controller
im running a greddy profec B. I like it alot, easy to adjust the settings you have a low boost and high boost knob set both where you want them and you can switch back and fourth between the two with the push of a button.
99 civic ex DD
B16 T3/66 CRX in the works!
B16 T3/66 CRX in the works!
-
mike93hatch
- Posts: 2869
- Joined: Tue Dec 05, 2006 5:42 am
Boost controller
im using a hallman pro rx manual boost controller (ceramic ball and lighter spring for high psi). the best mbc there is hands down. using it in conjunction with i think a 12psi wastegate spring and it shoots to 25psi and STAYS RIGHT THERE until redline.
http://cgi.ebay.com/ebaymotors/Hallman- ... enameZWDVW
http://www.hallmanboostcontroller.com/
i personally dont care for electronic boost controllers. id much rather use the honda ecu to control boost such as in hondata s300 where it has boost by gear and such. neptune and ectune probably has this also.
http://cgi.ebay.com/ebaymotors/Hallman- ... enameZWDVW
http://www.hallmanboostcontroller.com/
i personally dont care for electronic boost controllers. id much rather use the honda ecu to control boost such as in hondata s300 where it has boost by gear and such. neptune and ectune probably has this also.
-
N2HIFI
- Posts: 3349
- Joined: Fri Nov 17, 2006 6:22 am
Boost controller
i have hondata s200 with boost option but may upgrade down the road i really like the boost by gear option and thats what i want for down the line but i was looking for a suitable option for right now and i think i have all the correct info i need now
thanks guys
chris
thanks guys
chris
-Chris

'Cause Internet Hating IS Serious Business
http://gmrn2hifi.wordpress.com/
http://www.garagement-racing.com/

'Cause Internet Hating IS Serious Business
http://gmrn2hifi.wordpress.com/
http://www.garagement-racing.com/
