New Parts

N2HIFI · Post by **N2HIFI** » Tue Mar 27, 2007 3:58 pm

Well i finally got some of the major parts required for the new build so i figured i would post them up.

YCP- suzuki grand vitara pistons (bad ass low cost turbo pistons with stock honda bore size 75mm) The are aluminum and teflon coated and will handle 30psi and over 400hp 8.5:1 but will be 9.1 with my block head combo.

Hasting Rings- stock civic d series bore (and once again bad ass with low cost) handle 30psi and over 400hp

Tuner Toy rods- H-beams pretty much same as the eagles , just have some manufacturing differences to make h-beams clear with less machining, also come with arp bolts.

Also picked up a Y8 block just need to have the crank turned and then spec'd so i can order new bearings, then heat tanked and cleaned up then have the new parts installed.

i still have to order a full gasket set, but i already have headd studs on the way, the timing belt and misc other item here. i am thinking it should be realy to go into the car in about a month after i get the car back from paint.

ok now for some pics

JustRob · Post by **JustRob** » Tue Mar 27, 2007 4:09 pm

Damn, things are moving right along. I can't wait to see it done.

ImAJandILikeToSuckMenOffForMoney · Tue Mar 27, 2007 4:18 pm

I cant wait to see it done either :icon_biggrin:

J8k'S CRX · Post by **J8k'S CRX** » Tue Mar 27, 2007 5:34 pm

finish it so you can help be build my NA b series.:icon_biggrin:
builden the motor then the body? what about rolling gear and drive train?

TurboFreak · Post by **TurboFreak** » Tue Mar 27, 2007 5:44 pm

bah, those parts would look better in my black car :icon_biggrin: ...looks like you got a nice setup going on

xslickwhitetegx · Post by **xslickwhitetegx** » Tue Mar 27, 2007 6:38 pm

damn thoose are nice, just moveing along w/ the build I see... If you need more $ for parts PM me I got a sub and some other parts.. also want the wire delete in engine bay done...

greggles · Post by **greggles** » Tue Mar 27, 2007 7:14 pm

looks nice. can't wait to see the finished product.

DC_T · Post by **DC_T** » Tue Mar 27, 2007 9:28 pm

nice man, good luck w/ the build. hope everything goes smoothly.

N2HIFI · Post by **N2HIFI** » Wed Mar 28, 2007 3:41 am

J8k'S CRX;32323 wrote:finish it so you can help be build my NA b series.:icon_biggrin:
builden the motor then the body? what about rolling gear and drive train?

body goes for paint in a week or so depending on how fast i get Dabeast within's car done this week.

I also have ALOT OF prep work to do to the car still before it goes to paint.

as far as running gear, i have a si tranny but it will need a lsd and upgraded axles and a BIG clutch but these are things that i will order over the next month or so.

I still have to order, suspension componets, motor mounts, intercooler, BOV fuel pump, rims.. etc you know the big stuff the motor componest were easy.

chris

ImAJandILikeToSuckMenOffForMoney · Wed Mar 28, 2007 3:43 am

I thought you had an intercooler? JC thats all but its coming together nicely Chris.