opk guys i bought a 92 ex civic with a d15b7 motor blew and this motor was there so they put it in
im getting a d16y8 from andyjt what all do iu need to make it work?
let me know im its gonna be a bit b4 it goes into the car..
block and crank going to machine shop.
gonna install block gaurd. and forge inturnals for boost.
what ecu do i need?
and do i need to mess with the wiring?
the car already has the y8 manifold on it
thanx:drinkup1:
help me
-
Spork
- Posts: 6680
- Joined: Thu Nov 16, 2006 12:52 am
help me
if it was a y8 before, you should be pretty much good to go, just make sure you are running the right ecu (i don't know which one that is- im not a d-series guy) it should just be plug and play for you...91turbo;10426 wrote:opk guys i bought a 92 ex civic with a d15b7 motor blew and this motor was there so they put it in
im getting a d16y8 from andyjt what all do iu need to make it work?
let me know im its gonna be a bit b4 it goes into the car..
block and crank going to machine shop.
gonna install block gaurd. and forge inturnals for boost.
what ecu do i need?
and do i need to mess with the wiring?
the car already has the y8 manifold on it
thanx:drinkup1:
This post comes with a guarantee: I guarantee that I don't care what you think about it.
-
stolle
- Posts: 2241
- Joined: Wed Nov 08, 2006 5:47 pm
help me
d16y8 should bolt right up you my have to change plugs and lengthen wires. you should get a p28 ecu, i wouldnt use a block guard i would post the block...91turbo;10426 wrote:opk guys i bought a 92 ex civic with a d15b7 motor blew and this motor was there so they put it in
im getting a d16y8 from andyjt what all do iu need to make it work?
let me know im its gonna be a bit b4 it goes into the car..
block and crank going to machine shop.
gonna install block gaurd. and forge inturnals for boost.
what ecu do i need?
and do i need to mess with the wiring?
the car already has the y8 manifold on it
thanx:drinkup1:
edit: you can actually just plug everything in and run your stock ecu it will run, but for turbo and chipping i would use a p28...
Team NOCO Crew Member #2
-
stolle
- Posts: 2241
- Joined: Wed Nov 08, 2006 5:47 pm
help me
block posting:91turbo;10435 wrote:ok i belive it had a d16z6? was vtec had turbo at one time
you say no block gaurd?
whats post the block?
http://www.homemadeturbo.com/tech_proje ... index.html
if its wired for vtec the motor should be plug and play like spork said...
Team NOCO Crew Member #2
-
stolle
- Posts: 2241
- Joined: Wed Nov 08, 2006 5:47 pm
help me
plugs should all be the same minus the air temp sensor, the y8 has it on the air intake and the z6/b7 have it on the intake manifold so you will have to address that...91turbo;10439 wrote:kool lets hope so.. but y8 out of a 00 that obd2 and car is a obd1
Team NOCO Crew Member #2