fog light help

chaunce
Posts: 141
Joined: Sun Sep 13, 2009 4:23 pm

fog light help

Post by chaunce »

Ok so I m helping a friend put jdm fogs in a 99 si. I have them installled but I'm stuck at the wiring.
I can't figure out the directinons. Any sugestions or help would be great
:wall:
JustRob
Posts: 7884
Joined: Sat Nov 18, 2006 7:28 pm

fog light help

Post by JustRob »

60 seconds of searching brought me to this...

http://www.handa-accessories.com/civic/ ... lights.pdf
User avatar
HardCore97
Posts: 2590
Joined: Thu Nov 30, 2006 10:57 pm

fog light help

Post by HardCore97 »

rob knows how to use that magical thing called google...
i may not be "logical" but at least i can change my oil...

Racecore.com
User avatar
RyanA
Posts: 2492
Joined: Mon Dec 25, 2006 9:51 pm

fog light help

Post by RyanA »

They are very hard to wire. You have to like screw down a ground and plug in a wire. Nearly impossible without specialty tools.
MidMoMoFo Built
Take pride in what you do. Make it look like it.
mlr198769er
Posts: 91
Joined: Mon Aug 17, 2009 4:51 am

fog light help

Post by mlr198769er »

wow thats all im gonna say. One hot one ground. Wiring a light is not hard. Its like as hard as... well hang on..... hard as breathing ya ya breathing is a good answer
chaunce
Posts: 141
Joined: Sun Sep 13, 2009 4:23 pm

fog light help

Post by chaunce »

yeah couldnt figure those directions out. the plugs those directions said to use were both male so thats why i asked
mlr198769er
Posts: 91
Joined: Mon Aug 17, 2009 4:51 am

fog light help

Post by mlr198769er »

if in doubt make a conversion plug... dont cut lol takes the value down on the car. Nothing better than buying a car that has haggered ass wiring
chaunce
Posts: 141
Joined: Sun Sep 13, 2009 4:23 pm

fog light help

Post by chaunce »

ill give it a try
mlr198769er
Posts: 91
Joined: Mon Aug 17, 2009 4:51 am

fog light help

Post by mlr198769er »

worst that will happen if you use existing wires is you run the wires backwards which will still turn on the lights. Is the high and low beams on the same connector a test light is like gold when doing stuff like this... nothing really bad will happen just keep some spare fuses laying around... when i got to junk yards i rack up as many fuses as possible and buy them all for a buck or two lol
chaunce
Posts: 141
Joined: Sun Sep 13, 2009 4:23 pm

fog light help

Post by chaunce »

fixed. there was a piece missing from one of the harnesses and that fuse idea is a good one for sure lol