DIY: How to remove the window weather stripping molding

[4Door]

First you need to remove the B pillar caps, i also have that long piece taken off but you don't have to... This what it looks like after you remove the B pillar caps... For the front you also need to remove the mirror(s)

First gently pry up the outer corner with a regular screw driver, or something similar, plastic would be prefferd...

Next, in a downward motion, pull the top of the molding toward you, start on the outer most corner, theres no need for muscle so be gentle...

This is how it should look, keep going to the end...

At this point the molding is ready to be lifted off... gently wiggle from right to left and in an upward fashon...

It is now off... :TU:

[B16aRS]

on my car i rolled down the window and stuck a screw driver in the clips and pried a little on each one then it slid back.