2010 Civic

Fenian · Post by **Fenian** » Mon Dec 14, 2009 3:27 am

budget_crx;213085 wrote:Skunk 2 does actually, even though its not the entire shifter it should work pretty well. The skunk 2 part is basically an extension that fits between the cable and the factory shifter, adding length after the pivot point which shortens the throw. I am half tempted to try and put one of these on the end of the Mugen shifter to see if i can make it even shorter :lmao:

Welcome to the site BTW!!

I don't know if it will work the same, but the Fit has the same sort of short shifters/adapters available. One guy on Fitfreak.net did add the Skunk2 adapter to the Mugen short shifter. It worked, but he had to use a ball peen hammer to make an indentation into the metal behind the assembly. Otherwise, 1st, 3rd, and 5th would hit metal because of the added length of the adapter on the already shortened Mugen box. Just something to think about.

/Again, welcome to the new guy.

RallyeRedFG1 · Post by **RallyeRedFG1** » Mon Dec 14, 2009 3:38 am

FenianFit;213105 wrote:I don't know if it will work the same, but the Fit has the same sort of short shifters/adapters available. One guy on Fitfreak.net did add the Skunk2 adapter to the Mugen short shifter. It worked, but he had to use a ball peen hammer to make an indentation into the metal behind the assembly. Otherwise, 1st, 3rd, and 5th would hit metal because of the added length of the adapter on the already shortened Mugen box. Just something to think about.

/Again, welcome to the new guy.

hmm see I don't like having to modify the parts I'm putting on too much. Personally I don't like extremely short throws, I just want one that's a little shorter yet still comfortable to shift with. Plus I just thought it would be a good addition to the skunk2 weighted shift knob I'm getting for xmas :party3:

orange94hatch · Post by **orange94hatch** » Mon Dec 14, 2009 3:56 am

welcome!!

Spork · Post by **Spork** » Mon Dec 14, 2009 4:24 am

sharpie;213052 wrote:how does it handle the load?

I have chosen this quote to begin de-maturing this thread.

sharpie · Post by **sharpie** » Mon Dec 14, 2009 5:13 am

Spork;213116 wrote:I have chosen this quote to begin de-maturing this thread.

ohhhh i get it you mean like seamen?

where's the giff with the bear from jungle book cuming on the kids lol

Capt'n Obvious · Post by **Capt'n Obvious** » Mon Dec 14, 2009 6:31 am

MyfodoSi;213051 wrote:Welcome to the board. Coilovers ftw.

i wanna be a baller
shot caller

Post by **budget_crx** » Mon Dec 14, 2009 7:38 am

budget_crx;213085 wrote: I am half tempted to try and put one of these on the end of the Mugen shifter to see if i can make it even shorter :lmao:

FenianFit;213105 wrote:I don't know if it will work the same, but the Fit has the same sort of short shifters/adapters available. One guy on Fitfreak.net did add the Skunk2 adapter to the Mugen short shifter. It worked, but he had to use a ball peen hammer to make an indentation into the metal behind the assembly. Otherwise, 1st, 3rd, and 5th would hit metal because of the added length of the adapter on the already shortened Mugen box. Just something to think about.

I was just curious if it could work or not, the Mugen alone is fine for me!

Phate · Post by **Phate** » Mon Dec 14, 2009 9:26 am

Good info on the lil adapter thing, I didnt know about them.

kleancut · Post by **kleancut** » Mon Dec 14, 2009 1:51 pm

sharpie;213052 wrote:Welcome and buy the intro....

how much does it cost? id like to buy one!

its funny were all impressed from his intro, but thats how intros are suppose to be. were just so use to dbags coming here..

first mods:
suspension.
wheels.

sharpie · Post by **sharpie** » Mon Dec 14, 2009 3:36 pm

kleancut;213201 wrote:how much does it cost? id like to buy one!

More than you can afford pal!! Ferrari