ReNewed the Headlights!

Ksprelude01 · Post by **Ksprelude01** » Wed Apr 04, 2007 1:39 pm

Finaly got tiered of the yellowed headlights and did a little wet sanding and polishing to get them new looking again!

Products used.
600 grit wet sand
2000 grit wet sand
rubbing compound
meguiars Plastex compound

(Both headlight looked like this)

Turned out pretty good after only about 30min of work. And it only cost like $30 in stuff from autozone.

JVolsch · Post by **JVolsch** » Wed Apr 04, 2007 2:33 pm

Very nice. That is def. a huge improvement.

DC_T · Post by **DC_T** » Wed Apr 04, 2007 6:40 pm

nice, looks a lot better, definitly something i need to do w/ mine

90CivicEx · Post by **90CivicEx** » Wed Apr 04, 2007 7:15 pm

You can see now lol, looks good and such a big improvment on how the car looks in the front.

Ksprelude01 · Post by **Ksprelude01** » Wed Apr 04, 2007 7:26 pm

It made the car look so much better from the front. So when i put the oem fogs and the front lip on it will look nice and clean!

? Has any one ever taken apart their headlight? Is it very hard to do? I need to get some water out of the one light.

ImAJandILikeToSuckMenOffForMoney · Thu Apr 05, 2007 1:00 am

Ksprelude01;34214 wrote:It made the car look so much better from the front. So when i put the oem fogs and the front lip on it will look nice and clean!

? Has any one ever taken apart their headlight? Is it very hard to do? I need to get some water out of the one light.

Josh 99blackhatch has done it before. Its not hard though.

irevto9k · Post by **irevto9k** » Fri Apr 06, 2007 3:51 am

pretty easily done with the rsx headlights so i would guess it goes the same for a civic headlight just be careful that you dont brake the lil clips

Ksprelude01 · Post by **Ksprelude01** » Fri Apr 06, 2007 12:08 pm

I'm thinking the clips are broken already, due to headlight bounce. But thanks for the info!

SnailFed · Post by **SnailFed** » Fri Apr 06, 2007 3:31 pm

Looks a lot better