coilovers

nighthawk · Post by **nighthawk** » Thu Sep 16, 2010 1:09 pm

I was wondering if ek coilovers are compatible with dc's? I am looking at a pair of ek f&f type 1's for a decent price and wanted to verify whether they would fit a 96 integra ls.

JustRob · Post by **JustRob** » Fri Sep 17, 2010 12:06 am

The fronts are 100% compatible. The rears are as well, but you'll need to put some washers in between the rear lower control arm and strut as it's too wide for the EG/DC rear LCA.

nighthawk · Post by **nighthawk** » Fri Sep 17, 2010 3:46 pm

Yeah, after some research that seems to be what everyone is saying to do. Thanks for the feedback Rob it's much appreciated.

spoon_fed_civic · Post by **spoon_fed_civic** » Mon Oct 25, 2010 6:29 am

i put some ek struts on my 92 hatch (same suspension as the teg) i had to cut the bushing on my rear lcas to fit the struts.

nighthawk · Post by **nighthawk** » Mon Oct 25, 2010 6:43 am

Yeah, thats what I ended up having to do to get them to fit. I just had a machine shop shave them down and it made the ek's fit directly on my dc with no problems.