Question of the day. -Topic- Ground Control springs

civicex442 · Post by **civicex442** » Tue Jan 26, 2010 3:31 pm

Will Ground Control springs ment for koni yellows fit stock civic/integra shocks?

J.M.P · Post by **J.M.P** » Tue Jan 26, 2010 3:43 pm

civicex442;218238 wrote:Will Ground Control springs ment for koni yellows fit stock civic/integra shocks?

Yes they will fit, I have them on my Integra.

EDIT: do you mean just the spring or the whole sleeve setup?

JustRob · Post by **JustRob** » Tue Jan 26, 2010 3:46 pm

You should be able to measure and compare to the stock Honda struts. I believe the Eibach springs for the Honda struts are 2.5" ID and 8" tall. I'd call Ground Control though just to be sure.

civicex442 · Post by **civicex442** » Tue Jan 26, 2010 3:57 pm

JustRob;218241 wrote:You should be able to measure and compare to the stock Honda struts. I believe the Eibach springs for the Honda struts are 2.5" ID and 8" tall. I'd call Ground Control though just to be sure.

im going to call them but I have to wait till 11 to call them. Im super bored at work so I thought i would pick some brains. and yes I want to use the sleeve too

RyanA · Post by **RyanA** » Tue Jan 26, 2010 4:24 pm

Sleeves made specifically for Koni's are smaller ID than ones made for stock shocks. Pretty sure the ID is too small to fit over a stock shock. They also have a groove machined into the bottom of them where the split rings on the Koni's seat.

civicex442 · Post by **civicex442** » Tue Jan 26, 2010 5:15 pm

scratch the question of the day. I was mistaken on the style of ground controls I have. Turns out the previous owner was using stock style ground controls with spacers on koni yellows. problem solved. thanks for the help