Post your swaybar set-up

Spork · Post by **Spork** » Thu May 22, 2008 4:43 am

I have spent most of my time in the world of EF's... very small and lightweight cars.... I do not know about the other chassis (EG, EK, DC, DA, BB, EP, ETC....) so I am curious what everyone runs around here. I know we have some suspension nuts, so I hope to get some good insight into what/why people run what they run.

My "best" set-up so far for my EF:
solid 22mm bar in back
stock DX bar up front

the car handled well, but I did notice that it was lacking if I really pushed the car into a corner.... so I am going to try a
hollow 23mm DA bar in front (auto-x/road course guys prefer these or the solid 19mm sedan bars to solid 22mm bars) and see if I like it better. if not, oh well, I still have a stock bar to put back on, and I'm only out like $20

v-tecivic · Post by **v-tecivic** » Thu May 22, 2008 5:01 am

my setup is:

eibach 26mm front and 17mm rear

eh2_Erik · Post by **eh2_Erik** » Thu May 22, 2008 6:29 am

GSR Front (24mm)

GSR Rear (14mm)

stock endlinks on both with blox rear lower control arms

Midori · Post by **Midori** » Thu May 22, 2008 9:22 pm

S.T. 1" (25.4mm) front
Type-R 22mm rear with adjustable endlinks

i would like a rear upgrade, i think a 28 or so would be absolutly perfect however no makes one... my options are ASR 24, Cusco 24 or 25 or ASR 32 Hollow set up... i wonder which one im gonna get hmmmm......

Nat X · Post by **Nat X** » Thu May 22, 2008 10:11 pm

Sorry to highjack....But who make adjustable endlinks for hondas????

Waffles · Post by **Waffles** » Thu May 22, 2008 10:25 pm

Whiteline 20mm Rear
Racingbeat 1.125" Front

Both soon to be removed.

mike93hatch · Post by **mike93hatch** » Fri May 23, 2008 12:17 am

si front and integra rear..

and also about to be taken off once i ever get around to it. dont need them for going straight. and who needs sway bars when your suspension doesnt even move lol.

jpciii · Post by **jpciii** » Fri May 23, 2008 12:21 am

Spork;116213 wrote: the car handled well, but I did notice that it was lacking if I really pushed the car into a corner.... so I am going to try a
hollow 23mm DA bar in front (auto-x/road course guys prefer these or the solid 19mm sedan bars to solid 22mm bars)

That isn't really true... past auto-x champs (who drove ef hatches) went with really big bars in the rear and really small (crx hf) bars in front, or no front bar at all up front. If you think your car suffers from understeer (I assume that is your complaint because that is EVERY honda racer's complaint), stiffen the rear more... higher spring rates in the rear and stiff dampers in the rear would also help.

go to the tech page at redshift motorsports for more details...

http://www.redshiftmotorsports.com/

:thumbsup2::thumbsup2::thumbsup2:

eh2_Erik · Post by **eh2_Erik** » Fri May 23, 2008 2:43 am

Nat X;116333 wrote:Sorry to highjack....But who make adjustable endlinks for hondas????

that would be... ASR, Blox, and Function7

http://www.jhpusa.com/store/pc/viewCate ... tegory=169

Dabeastwthn · Post by **Dabeastwthn** » Fri May 23, 2008 5:05 am

Um...What's a sway bar?

I'm still stock...