Official Post Your Suspension Setup Thread!

[granturismonut]

1994 Del Sol Si

Energy Suspension Poly Bushing Kit
Koni Yellows
Ground Control Coilovers 350front and 250 rear
Suspension Tech 25mmFront and 19mmRear Anti-Sway Bars
SPC Upper Control Arm Camber Kit
Neuspeed Front Strut Tower Brace
Goodridge SS Brake Lines
Vtec front brake conversion w/Hawk HP+ pads
Willwood brake proportion valve
Hurst Line Lock
Axis Maglite 15X7 with Falken Azenis
ARP extended wheels studs

Alignment Specs

-1.5 front -1.1 rear camber
0.8 front caster
-.12 front toe

[02Type-S]

Heres my suspension setup:

-Tein SS Coilovers
-SPC rear control arms and front balljoint camber kits
-19x8 TSW Thruxtons

[RyanA]

98 Civic DX 4 door

Koni Yellows
Ground Control coil overs
GC extended top hats at all 4 corners
ASR rear bar currently with GSR rear sway
Blox control arms
EX front sway
Had Si front strut bar. Now I have to grind it to clear the top hats...
Currently has 15" Kosei K1's but I just got my Speedy HSR's powder coated silver so they'll be going on tomorrow for a while.

I'll snap some pics with both wheels tomorrow after I get the car aligned.

Ryan

[99BlackHatch]

Black hatch...
Tokico Blues
H+R Race springs


White hatch...
Rolls on a full setup of SHIT!

[pr_tony_montana]

rockin H&R Sport springs and Blox LCA's. Stock struts...

[alowfodo]

H&R full body coilovers
skunk2 lca's
OEM SI strut bar
no-name camber kit
integra rear sway bar

[2kEXcp]

I've got an ASR rear subframe brace and CTR 22 mm rear sway bar on the rear. It uses OEM rubber bushings:


There is also an OEM 99-00 Si shock tower brace (not pictured).

The final suspension upgrade is a set of Edelbrock IAS coilovers, with a 32 mm (1-1/4") drop. Here are the coilovers fresh out of the box, before installation:


And this is what the car looks like with the coilovers installed:


The guys at work didn't even realize the car was lowered until I told them. Overall, there is a very noticeable improvement in cornering and understeer, but it's not as big an improvement as I had hoped.

[Liquor Assassin]

just bought a set of tokico illumina stuts/shocks and tokico springs, 2.25 drop all the way around
pics whenever i get this thing running, and get the springs on

[sn95guy]

current:
Kyb Agx 4 way adj (4 front 3 rear )
GC coil overs
Block Rear LCA's
Skunk2 Front adjustable UCA
GSR rear sway bar
APC Front Strut tower bar

Upgrading to :
ST front swap bar
GSR Lower control arms with ES inserts (have just need to install)
NRG 4 point lower tie bar
GSR front sub frame brace
ASR rear subframe brace
Type R rear sway bar
Bloxs ADJ end links
Beaks lower tie bar
Rear disc brake conversion
Nrg or carbing 3 point front Strut Tower bar
Rear Strut tower bar
C-pillar bar
6 point roll cage


chris

i want mine to sit that low... looks really good

[eh2_Erik]

I've got an ASR rear subframe brace and CTR 22 mm rear sway bar on the rear. It uses OEM rubber bushings:

Your rear sway bar is on upside down...