a6 to z6 harness help!!!

ricedout · Post by **ricedout** » Thu Nov 06, 2008 3:32 pm

i am putting a z6 in my 90 civic si and i need to know if the z6 motors have an injector resistor box. if not what controls the injectors, the ecu? and if someone has an injector box on their z6 ed6 then they are running obd0 injectors right? im clueless and am needing to get my si harness wired up for my z6. thx

JustRob · Post by **JustRob** » Thu Nov 06, 2008 5:26 pm

No, the Z6 never had a resistor box because it used Saturated injectors (Someone correct me if I'm wrong). Just reuse your OBD0 A6 injectors and resistor box if your using the PM6 or any other OBD0 ECU. If your converting to OBD1, use the OBD1 Z6 injectors and you will not need a resistor box.

mike93hatch · Post by **mike93hatch** » Thu Nov 06, 2008 7:25 pm

a injector resistor box does not control the injectors lol.

you can use either injectors, the a6 or z6. its your choice. if you use the z6 though youll need to remove the resistor box and solder the wires together and also cut the tab out in the a6 injector clips witha razor blade.

ricedout · Post by **ricedout** » Fri Nov 07, 2008 4:06 am

ok guys thx for the info