Carbon Coated Sycrons

Miggyp17 · Post by **Miggyp17** » Tue Jul 08, 2008 5:09 am

Are they good to have

ive heard they are for high rpm shifts

whats a good maker of them as i havent heard a whole lot bout them

mike93hatch · Post by **mike93hatch** » Tue Jul 08, 2008 5:22 am

the only maker i know of is gearspeed.

and they dont do anything anyways, not worth it. stock syncros are fine.

i had them once and all they did was make me grind gears.

Miggyp17 · Post by **Miggyp17** » Tue Jul 08, 2008 5:27 am

oh serously?

i have a d16z6 with some tranny its cable and an si and im not sure but

if im going and im getting close to a stop sign and i try to put it in 1st it just like doesnt wanna go

and 5th sometimes pops out and you have to literly jam it in there

any ideas?

mike93hatch · Post by **mike93hatch** » Tue Jul 08, 2008 10:15 pm

bring it to the tranny guru and he will fix ya up..

JesSi · Post by **JesSi** » Tue Jul 08, 2008 10:20 pm

So as you are stopping you can't put it into first? Or when you are stopped, you can't put it into first?

Miggyp17 · Post by **Miggyp17** » Wed Jul 09, 2008 8:07 pm

it just doesnt wanan go at netime hardly certain gears you literly have to kinda push it in there hard 1st and 5th mainly

MyfodoSi · Post by **MyfodoSi** » Wed Jul 09, 2008 9:22 pm

First of all, synchros for first only come in copper. You can't get those carbon coated. If you get them from gearspeed, they're going to cost you about $30 for first, and $50 for fifth. Then, you have to find someone who knows transmissions to put them in. And no, Nik doesn't know transmissions.

g3integragsr · Post by **g3integragsr** » Wed Jul 09, 2008 9:23 pm

1. Check Tranny Fluid
2. Check Clutch Cylinder Fluid
3. How old is your clutch?

mike93hatch · Post by **mike93hatch** » Wed Jul 09, 2008 10:32 pm

MyfodoSi;124568 wrote: Then, you have to find someone who knows transmissions to put them in. And no, Nik doesn't know transmissions.

mike93hatch;124380 wrote:bring it to the tranny guru and he will fix ya up..

.

luvmyhondas · Post by **luvmyhondas** » Fri Oct 17, 2008 7:44 pm

Miggyp17;124302 wrote:oh serously?

i have a d16z6 with some tranny its cable and an si and im not sure but

if im going and im getting close to a stop sign and i try to put it in 1st it just like doesnt wanna go

and 5th sometimes pops out and you have to literly jam it in there

any ideas?

sounds like you may have a bent/broken shift fork as well.