lurch95hatch;300553 wrote:Always stager it like that, it is set that way so you don't warp the block or head.
sharpie;300555 wrote:Yes go in that order and step the torque in the same order.
Step means you torque them at less torque then the manual calls for then you go back and torque them to spec.
thanks for the help guys.the only thing left to put back together on it now is the crank shaft pulley starter and a few vacuum lines and it should be done. which the vacuum lines and crank shaft pulley are the hardest things left i guess mainly the crank shaft pulley.
PSN: DumbRands
Diablo 2 Lord of Destruction: USeast acc: caution-cold
civicex;300556 wrote:thanks for the help guys.the only thing left to put back together on it now is the crank shaft pulley starter and a few vacuum lines and it should be done. which the vacuum lines and crank shaft pulley are the hardest things left i guess mainly the crank shaft pulley.
update:
got everything back together i was about to start it up and jsut turned it on and the fuel rail was leaking so i thought it was lose tightened it some more. it broke. so going to be handling that tomorrow.
PSN: DumbRands
Diablo 2 Lord of Destruction: USeast acc: caution-cold
civicex;300638 wrote:update:
got everything back together i was about to start it up and jsut turned it on and the fuel rail was leaking so i thought it was lose tightened it some more. it broke. so going to be handling that tomorrow.
ok got everything hooked up and shit but won't turn over.
it has spark maybe it's flooded?
PSN: DumbRands
Diablo 2 Lord of Destruction: USeast acc: caution-cold
i tried to check for cel codes but when i did the thing to check it, it'd just turn off so i'd just try and crank it and it'd turn back on not giving me a code. also when i'd crank it the cel would flicker.
civicex;300751 wrote:ok, for what though? my battery? and here's what it sounds like in side my car i can't figure out why you may have to turn your volume up for the first one. http://www.youtube.com/watch?v=96ehF-N6 ... e=youtu.be
i tried to check for cel codes but when i did the thing to check it, it'd just turn off so i'd just try and crank it and it'd turn back on not giving me a code. also when i'd crank it the cel would flicker.
well it was out of time so finally got it cranking and running but after a minute or less of idling it'd just shut off. then it won't start all the way. any ideas why?
PSN: DumbRands
Diablo 2 Lord of Destruction: USeast acc: caution-cold
civicex;300760 wrote:well it was out of time so finally got it cranking and running but after a minute or less of idling it'd just shut off. then it won't start all the way. any ideas why?
would anyone be willing to come look at it with me to figure it out please?
PSN: DumbRands
Diablo 2 Lord of Destruction: USeast acc: caution-cold