Oil pan question

lurch95hatch · Post by **lurch95hatch** » Mon Aug 06, 2012 5:12 am

Hey I'm doing an pile pan gasket change and I was just wanting to get some opinions. I have the new gasket and the rtv ultra black sealer. Anyone have Amy recommendations on how to go about it. I have heard both ways about rtv and gaskets, but I figured I would ask anyway. What's the bed way to do this gasket change? Any help is appreciated.

95_gsrfodo · Post by **95_gsrfodo** » Mon Aug 06, 2012 5:20 am

remove it clen all material left on block and pan i install sealer light on both sides of the gasket... some people use just gasket no sealer..

sharpie · Post by **sharpie** » Mon Aug 06, 2012 5:51 am

The way honda says to do it. I use Honda bond gasket sealer.

You'll need a torque wrench along with the specs and the sequence for the bolts.

lurch95hatch · Post by **lurch95hatch** » Mon Aug 06, 2012 12:56 pm

That's just what I thought, good thing I bought rtv with it. And I have a torque wrench and it should be about 8ftlbs in to out in opposite sides.