map sensor ?

Redline · Post by **Redline** » Sat Apr 21, 2012 9:49 pm

ok the hondata 3 bar and 4bar are the same price and i know the 4 bar holds 49+ psi but i only plan on running 25 so should i just order the 3 bar or say fuck it and get the 4 bar cause they the same price, and i know the 4 bar works with crome but does the 3 bar

portenio78 · Post by **portenio78** » Sun Apr 22, 2012 1:52 am

Get the 4bar. The 3bar maxes out at 27psi. In colder weather you might hit boost cut, so get the extra cusion and just get the 4.

Boosted_da · Post by **Boosted_da** » Mon Apr 23, 2012 1:50 am

true but at the same time some tuning programs do not have as grate of a resolutin with higher pressure map sensors. talk with your tuner. that will be your best bet

Phate · Post by **Phate** » Mon Apr 23, 2012 1:56 am

Boosted_da;292570 wrote:grate of a resolutin

wat?

Boosted_da · Post by **Boosted_da** » Mon Apr 23, 2012 2:02 am

try ftiting 30lbs in a 14x14 map then try 45lbs in a 14x14 map some programs do not extend the map so your jumping from a cell reading 5lbs to a cell reading 10lbs. and the ecu has to interpulate the diff. instead of going from 5lbs to 7.5lbs then to 10lbs. that what im getting at

Phate · Post by **Phate** » Mon Apr 23, 2012 2:20 am

Boosted_da;292573 wrote:try ftiting 30lbs in a 14x14 map then try 45lbs in a 14x14 map some programs do not extend the map so your jumping from a cell reading 5lbs to a cell reading 10lbs. and the ecu has to interpulate the diff. instead of going from 5lbs to 7.5lbs then to 10lbs. that what im getting at

I gotcha.

Redline · Post by **Redline** » Mon Apr 30, 2012 7:22 pm

I ordered my hondata 4 bar and base map today and right after i place order Jon from phearable.net calls me and trys to talk me down to a 2.5 bar says i dont need a 4 bar unless im running over 22psi. He tryed to tell me the 2.5 bar was better than the 4bar for any boost under 22psi and that the 4bar wont read correctly under 15psi

rickles8099 · Post by **rickles8099** » Mon Apr 30, 2012 7:49 pm

if it doesnt read correctly under 15lbs it would be not used at all. how would a car idle if it cannot work.

Boosted_da · Post by **Boosted_da** » Tue May 01, 2012 6:17 am

wtf it will work. i dont wana say as well but not as acuratly of some cars/programs like i said in my above post its just kind of overkill

Redline · Post by **Redline** » Tue May 01, 2012 7:50 pm

Its fine i went with the 2.5 bar and limiting my self to 20psi so my motor last longer its still my dd so i dont need 500hp