Sea Foam treatment?

ZenkiS14 · Post by **ZenkiS14** » Fri Feb 25, 2011 9:42 pm

Any of you guys ever try doing the sea foam treatment? Im having gas milege issues and maybe a stuck injector, I was just wondering what the best way to do it on these motors are...

HardCore97 · Post by **HardCore97** » Fri Feb 25, 2011 10:00 pm

i just do it like the instructions say. 1/3 in gas, 1/3 in oil, and 1/3 through the brake booster line. some people dont like putting it in the oil though so thats up to you

luvmyhondas · Post by **luvmyhondas** » Fri Feb 25, 2011 11:09 pm

i had good luck with it unsticking some rings in a CRX once. definitely couldn't hurt.

91TEGDA · Post by **91TEGDA** » Fri Feb 25, 2011 11:12 pm

HardCore97;257281 wrote:i just do it like the instructions say. 1/3 in gas, 1/3 in oil, and 1/3 through the brake booster line. some people dont like putting it in the oil though so thats up to you

i have heard that you need to do an oil change about 15 min after you put it in the oil tho.

JDM EM1 · Post by **JDM EM1** » Sat Feb 26, 2011 5:36 am

91TEGDA;257287 wrote:i have heard that you need to do an oil change about 15 min after you put it in the oil tho.

this is true.

I'd def do it right before your going to change your oil. I've used sea foam plenty of times. gas/oil/booster line. make sure you read the instructions & amount that is needed.

when doing it in booster line, do it slowly so the car doesn't die out on u, then once u poured the amount needed I always held throttle around 2k-3k for a few ( a lot of smoke will come out) U can drive it around if you'd like or just let it idle for 15-20mins, then change your oil & filter.

ZenkiS14 · Post by **ZenkiS14** » Mon Mar 07, 2011 3:46 pm

Well I bought some BG 44K stuff through my work, supposed to be alot nicer than SeaFoam, gonna throw that in today with a full tank. So I'm gonna run that stuff through the fuel system this week, and then probably do some seafoam through the intake system sometime this week when I do an Oil change.

Hope it helps!