z6/y8 Mini Me Advice

99BlackHatch · Post by **99BlackHatch** » Thu Dec 24, 2009 10:14 pm

Justin, what year is your CX?

HondaChild · Post by **HondaChild** » Thu Dec 24, 2009 10:46 pm

99BlackHatch;214551 wrote:Justin, what year is your CX?

Its a 96 DX, the ECU I used was from a 98, the head was from a 97 with 105k miles, after I ported and polished the head myself, put new Valve seals in and did some combustion chamber work, the car ran perfect besides my stock bottom end was showing its mileage. I re-pinned my harness and ran new wires for vtec and knock.

Post by **stolle** » Fri Dec 25, 2009 12:10 am

maybe we should start an extensive FTP (code 91) thread as far as what cars have them and what cars dont, what you need to get rid of the cel etc...

i will start by posting this link:
http://www.ff-squad.com/technet/code91.htm

99BlackHatch · Post by **99BlackHatch** » Fri Dec 25, 2009 4:34 pm

Great idea Stolle.

N2HIFI · Post by **N2HIFI** » Fri Dec 25, 2009 5:37 pm

rickles8099;214538 wrote:not all cars have the ftp to throw the codes, so not all cars will throw them like you assume that all the ones i worked on had them.

one thread, two different ways of going about it:

http://www.superhonda.com/forum/f6/peop ... ol-346684/

that fix that they showed is the one from ffsquad that did not work on two completely different cars that both had similar mini-me swaps

JustRob · Post by **JustRob** » Fri Dec 25, 2009 6:10 pm

N2HIFI;214619 wrote:that fix that they showed is the one from ffsquad that did not work on two completely different cars that both had similar mini-me swaps

They even say on FF Squad that it doesn't really work.