Turbo flange???

gsrauto98 · Post by **gsrauto98** » Fri Dec 04, 2009 4:22 am

twkdcd595;211641 wrote:
are the 2 studs on the left hand side of the picture actually closer spacing than the right... they appear to be but i wanna make sure its not the angle of the picture tricking my eyes.

EDIT: posted on honda-tech for more opinions.

and yes the two studs/holes on the left are closer than the two on the right

Waffles · Post by **Waffles** » Fri Dec 04, 2009 5:36 am

gsrauto98;211658 wrote:the turbo is too small for a diesel

Not for a 4cyl turbo.

That is an odd ball flange, I cant find anything like that in any of the catalogs.

twkdcd595 · Post by **twkdcd595** » Fri Dec 04, 2009 6:59 pm

Someone on hondatech said maybe newer volvo... I looked and agian see something close but not quite right still.

sharpie · Post by **sharpie** » Fri Dec 04, 2009 7:23 pm

it looks like a volvo or a saab one

gsrauto98 · Post by **gsrauto98** » Fri Dec 04, 2009 8:20 pm

more pics..

sharpie · Post by **sharpie** » Fri Dec 04, 2009 8:27 pm

i have the same cigar cutter lol

qwarnon · Post by **qwarnon** » Mon Dec 07, 2009 12:55 pm

off some turbo heavy machinery? or little mini truck?, like the dihatzu's or w/e they are

like off of this thing

http://www.daihatsu.com/catalogue/delta ... index.html

I'm just throwing some possible crazy flanges out there

twkdcd595 · Post by **twkdcd595** » Mon Dec 07, 2009 2:05 pm

Honestly your most cost effective option it going to be to have someone cut you a flange for this thing as opposed to anything else... unless you want to use a different a/r hotside and can justify the extra cost.

You can get a flange cut from like weirtech, bmc, etc... there is tons of places who will do it.

gsrauto98 · Post by **gsrauto98** » Mon Dec 07, 2009 9:25 pm

twkdcd595;212131 wrote:Honestly your most cost effective option it going to be to have someone cut you a flange for this thing as opposed to anything else... unless you want to use a different a/r hotside and can justify the extra cost.

You can get a flange cut from like weirtech, bmc, etc... there is tons of places who will do it.

i pm'd weirtech on h-t and gave him the link to the thread you made over there and he was like wtf i haven't seen that one before. I gave him some measurements i took and he said it would be pretty tough. So i have to try and make a gasket for it and send it to him.

twkdcd595 · Post by **twkdcd595** » Thu Mar 04, 2010 8:50 pm

Just to update so if anyone ever searches this, it is a GT2560 from a Isuzu NPR or GMC w4500.