Help! 97 honda civic lx

crazysol · Post by **crazysol** » Wed May 28, 2008 2:56 pm

I Just need to look at the intake manifold. Someone else took the intake manifold off, so i having trouble hooking all the vac. and coolant lines up.

What i really need is to look at your stock set-up. 97 honda civic lx. They have the intake manifold with the throttle body stacked on it. d16y7

Also i have a d16y8 intake manifold, but sensors and all that good stuff didnt line up at all.

If anyone can help me with hooking the stock intake or y8 intake let me know. Or if you have the same car i need to take a look at it for like 5 minutes.

314 496 8525 Daniel

I will be working on the car after 5:00 In ofallon meadows. As i have for the last 2 days.:nervous:

I am without a car until this runs.

crazysol · Post by **crazysol** » Thu May 29, 2008 2:54 pm

Couldnt figure out the stock intake manifold last night. Lucky for me, a friend of mine had a skunk2 intake manifold to throw on instead.

It runs and drives!!

I still need help with vaccum (sp) lines, and sensors. I will pay someone if they can come out and hook all my sensors and vac. lines up. Also i have a complete vtec harness to get donor sensors from

PLEASE HELP im without a car

314 496 8525 Thanks Daniel

And now pics

crazysol · Post by **crazysol** » Thu May 29, 2008 2:59 pm

motor Shot

White91Hatch · Post by **White91Hatch** » Thu May 29, 2008 8:58 pm

Team Save the single cam!!!!!FTW

crazysol · Post by **crazysol** » Mon Jun 02, 2008 3:30 pm

Still need help with some sensors, vac. line, and coolant lines. Runs and drives, but not right. Someone help i have cash i will give to you. 60$$

Someone help its so clean you could eat off it.

crazysol · Post by **crazysol** » Mon Jun 02, 2008 3:33 pm

cleaned and put new wires and valve cover i had laying around.

JustRob · Post by **JustRob** » Mon Jun 02, 2008 3:38 pm

You need to hook the IAT sensor back up. Use the OBD-2 sensor that goes into the intake or cut the OBD-2 plug of and replace it with one from an OBD-1/OBD-0 Civic/Integra and plug it into the IAT sensor on the side of the intake manifold.

crazysol · Post by **crazysol** » Mon Jun 02, 2008 3:46 pm

Is that what im seeing to the right of the fuel pressure regulator (in the pic). I was just going to hook the org. sensor to the intake (you can barely see it in the first pic.).

You wanna come out and help me.

crazysol · Post by **crazysol** » Wed Jun 04, 2008 2:36 pm

100 quick cash to fix this

it starts ups and drives around the block.