i got me a hatch tonight

ricedout · Post by **ricedout** » Fri Mar 28, 2008 2:31 am

I might need a clutch job and/or a timing belt waterpump job. anyone willing to help me out??? its for a 90 civic std

ObsesionWitSped · Post by **ObsesionWitSped** » Fri Mar 28, 2008 2:33 am

Congratulations.

ObsesionWitSped · Post by **ObsesionWitSped** » Fri Mar 28, 2008 2:40 am

I just saw the other FS thread. It was sold to you by DaBeastWthn, not Spork.

andyjt · Post by **andyjt** » Fri Mar 28, 2008 3:16 am

congrats on the new purchase!

Dabeastwthn · Post by **Dabeastwthn** » Fri Mar 28, 2008 6:07 am

Check that adjustment first. Like Steve said it could just need adjusted to fix it or at least let you go awhile w/o worrying about replacing it.

Spork · Post by **Spork** » Fri Mar 28, 2008 8:01 am

adjust the cable out and the noise should go away. when I bought the car I was told it had a newer clutch in it already.

ricedout · Post by **ricedout** » Fri Mar 28, 2008 1:25 pm

hmmm alright ill check it out tonight. and i got it from christ not steve... but steve had the car so he know about it. but thx guys

ricedout · Post by **ricedout** » Sat Mar 29, 2008 6:39 pm

ok so i pulled the #1 spark plug wire and it was covered in oil. i think it requires me to change the spark plug seal. how do i do that? do i need to pull the head? or just take off the v/c and replace that and the seals? i think thats it...lmk more info thx

N2HIFI · Post by **N2HIFI** » Sat Mar 29, 2008 6:45 pm

just pull the VC off the gasket is in the VC, you can get new ones from autozone.. pretty much any D-series ones will work

ricedout · Post by **ricedout** » Sun Mar 30, 2008 12:46 am

i figured that. im bout to go there now b4 i fing something else wrong wit it lol. thx chris

ok i replaced the v/c and all the little grommits (sp) and did the plugs and wires. and looked at the timing belt while the v/c was off and it looks almost new... so if anything ill check out the waterpump and see if that might need replacing. but i am awaiting for my buddy to return my jack to do the oil change then do the fuel treatment and drive it around a little bit before i start it up and see if it runs any better