headgasket???

tommygun89hb · Post by **tommygun89hb** » Wed Dec 12, 2007 2:56 am

mine was a little warm but it wasnt super hot at all it was warmer than the intake or the header

JustRob · Post by **JustRob** » Wed Dec 12, 2007 3:02 am

PUT YOUR OEM CAP, ROTOR, COIL AND WIRES BACK ON THE CAR!!! MSD=JUNK!

Who told you not to put those on your car...

HondaChild · Post by **HondaChild** » Wed Dec 12, 2007 3:02 am

tommygun89hb;84261 wrote:mine was a little warm but it wasnt super hot at all it was warmer than the intake or the header

okay well maybe its normal just never noticed. I reassembled the dizzy after taking the cap and rotor off the car will not start now. it attemps to but does not succeed.

HondaChild · Post by **HondaChild** » Wed Dec 12, 2007 5:52 am

OKay so I am getting spark, getting fuel, and the compression was 150 psi in 3 cylinders and 145psi in #3. Dont know if those compression numbers are good or not. and my spark plugs are covered in oil and gas.

tommygun89hb · Post by **tommygun89hb** » Wed Dec 12, 2007 6:16 am

your valve cover gasket set def needs to be replace for sure
and the readings for you compression are good
not to big of a diffrence in the one cylinder so its all good

HondaChild · Post by **HondaChild** » Wed Dec 12, 2007 1:28 pm

tommygun89hb;84295 wrote:your valve cover gasket set def needs to be replace for sure
and the readings for you compression are good
not to big of a diffrence in the one cylinder so its all good

okay cool but it still wont start. and I have no idea why.

tommygun89hb · Post by **tommygun89hb** » Wed Dec 12, 2007 2:56 pm

did you get it started justin

HondaChild · Post by **HondaChild** » Wed Dec 12, 2007 4:26 pm

tommygun89hb;84333 wrote:did you get it started justin

nope still no luck the motor cranks over just fine but no start.

tommygun89hb · Post by **tommygun89hb** » Wed Dec 12, 2007 4:34 pm

thats suck

Spork · Post by **Spork** » Wed Dec 12, 2007 4:48 pm

This:

HondaChild;84263 wrote:I reassembled the dizzy after taking the cap and rotor off the car will not start now.

+

This:

HondaChild;84288 wrote:my spark plugs are covered in oil and gas.

Suggests that this:

HondaChild;84288 wrote:OKay so I am getting spark

is NOT true. are you 100% sure that you get spark in the cylinders?

and have you double checked the firing order on the dizzy?

honda firing order (I know for b-series, and it should be the same for d-series),if you are looking at it from straight on, should be like this:

dizzy:
3 4
1 2

Motor:
4 3 2 1