will this dizzy work on 96 teg? HELP!!!

98ls1ttop · Post by **98ls1ttop** » Tue Aug 28, 2007 6:49 pm

ok guys, im new to the forums...and partially new to these small cars. ive been a member of 417 for a while and i asked this question and evidentally no one can answer it. here it goes, will a 94 ls dizzy work on my 96 ls ?? i know the bolt holes line up but the plugs are different, i hear that u can modify it so it can work. anyone know how this is done?? ive been searching for a good used one for a while and this is all i came up with, so someone please help! supposed to meet the guy tonight to trade him a 96 gsr dizzy i got for this one

deetz · Post by **deetz** » Tue Aug 28, 2007 6:50 pm

i dont think so, i beleive a 96 is odb2a, and a 94 is odb1

N2HIFI · Post by **N2HIFI** » Tue Aug 28, 2007 7:34 pm

you can cut and splice the wires basically color match, solder and heat shrink and call it a day. This is common when doing swapping obd1 into obd2

chris

Spork · Post by **Spork** » Tue Aug 28, 2007 7:37 pm

you can do it if you mod the plugs, but you may run into prolems with emissions testing since you will be running an obd1 dizzy on an obd2 car.

Waffles · Post by **Waffles** » Tue Aug 28, 2007 7:37 pm

Spork;63300 wrote:you can do it if you mod the plugs, but you may run into prolems with emissions testing since you will be running an obd1 dizzy on an obd2 car.

HUH, Its the same dizzy with a different plug, no problems with emissions.

Spork · Post by **Spork** » Tue Aug 28, 2007 7:38 pm

then carry on.

but i think you missed the "may run into problems" part... and the part where i actually dont give a damn about emissions and obd systems.

98ls1ttop · Post by **98ls1ttop** » Tue Aug 28, 2007 7:57 pm

yeah i dont care about emissions, there is no emissions out here, every vehicle i own including my 06 f150 larait wont pass emissions if we had it

Spork · Post by **Spork** » Tue Aug 28, 2007 8:05 pm

then, with some plug modification, it will run just fine.

i actually have an LS dizzy on my vtec motor, and it runs just fine

98ls1ttop · Post by **98ls1ttop** » Tue Aug 28, 2007 8:24 pm

only 1 bolt hole lines up....how u manage that?? i have a 96 gsr dist. and u can only bolt it in 1 hole

Spork · Post by **Spork** » Tue Aug 28, 2007 8:29 pm

I cut the bottom tab off, and opened teh back tab so that it can be held in place with a big washer on the back bolt. It's been like this for 2 months now, and hasn't budged and doesnt leak any oil at all. But I *needed* to run it this way because there is no obd0 vtec distributor that I can purchase in the states, I'd have to spend an arm and a leg getting one from oversees.