92_luder;295899 wrote:i have a new expansion valve already and i planned on buying the drier new. so will the 95 civic a/c lines fint the integra pump?
no they will not fit the compressor.
My solution is really only if you had an integra compressor and condensor. You can basically use all integra lines or 50/50 integra/civic lines. Basically it keeps your options a little broader if you can't find the civic a/c hardware.
ok the car had a/c in it. how hard will it be to convert the wiring to r134....because I am having a hell of a time finding r12 parts.....and being that i need the pump i figure i should consider converting to a 95 system and just buy the whole thing from the junkyard.
Jesus, keep it simple guys. The Civic stuff is a dime a dozen and can be bought for next to nothing. No need to get crazy and start retrofitting Integra parts.
The wiring is simple. The interior HVAC harness from a '94-'95 Civic is all that is needed. It's plug and play on all '92-'95 Civics.
JustRob;296077 wrote:Jesus, keep it simple guys. The Civic stuff is a dime a dozen and can be bought for next to nothing. No need to get crazy and start retrofitting Integra parts.
The wiring is simple. The interior HVAC harness from a '94-'95 Civic is all that is needed. It's plug and play on all '92-'95 Civics.
appreciate it, last question....i have the r12 box under my dash already...everything under the dash is there already.....will the r134 lines not fit into the fitting at the firewall?
I hope I can help. We have the exact setup. I have a 93 cx hatch with LS swap and kept the a/c in my car. I got a delsol vtec bracket to fit my compressor and went to oreilly's to get a R12 to R134A converter, which they carry on the shelf. That's it. Now I have Ice cold A/C. Hope this helps.
92_luder;296078 wrote:appreciate it, last question....i have the r12 box under my dash already...everything under the dash is there already.....will the r134 lines not fit into the fitting at the firewall?
No. Like I said, everything has to match. It has to be a complete '92-'93 or '94-'95 setup. Underhood wire harnesses and condensor fans are about the only interchangeable parts.
Ok cool, thanks guys. I think I may have finally found a complete r12 setup, still short the bracket though. From what I've read I can only use the delsol b16 and the crv bracket to use the d series pump
