MSD cap

stlmadpanda · Post by **stlmadpanda** » Fri Dec 29, 2006 1:30 pm

I'm looking to buy an MSD cap. but before i do i was wondering what i would all need for it to work. Im not sure if i would need an MSD box or just an external coil? Any help would be appreciated.

Waffles · Post by **Waffles** » Fri Dec 29, 2006 4:43 pm

You will need to extend the wires from the stock coil to the new coil. Make sure the new coil can handle the RPMs of your engine. A basic Accel coil can only handle about 5400RPM before it starts to get weak. A MSD box is not required at all.

stlmadpanda · Post by **stlmadpanda** » Fri Dec 29, 2006 9:34 pm

yeah i would go with a msd blaster 2 coil so i dont need a a msd box. which wires do i use for + and - on the coil

91civicsi · Post by **91civicsi** » Fri Dec 29, 2006 11:16 pm

The wires that are hooked up now are marked pos. and neg.

stlmadpanda · Post by **stlmadpanda** » Sat Dec 30, 2006 1:15 am

what wires are you talking about

91civicsi · Post by **91civicsi** » Mon Jan 01, 2007 11:36 pm

The ones that go to your factory coil under the cap.

stlmadpanda · Post by **stlmadpanda** » Tue Jan 02, 2007 3:27 am

thanks for the info