CRX91
Posts: 612Joined: Sat Aug 01, 2009 7:30 am
Post by CRX91 Mon Nov 09, 2009 6:58 pm
im doing a rear disk brake conversion on my hf.
Devil Crx
Posts: 1410Joined: Tue Sep 23, 2008 8:47 pm
Post by Devil Crx Mon Nov 09, 2009 7:20 pm
you need the ebrake cable from the si/da that you are pulling the rear discs from. Your current ebake cables will not work.
*GMR* CRX Superleggera
jerren, youre #5, now go put that in your sig.
crx08
Posts: 1142Joined: Tue Nov 28, 2006 1:45 am
Post by crx08 Mon Nov 09, 2009 7:22 pm
and a 40/40 prop valve you can pull off a DA with out ABS
stl-imports.com/forums
Devil Crx
Posts: 1410Joined: Tue Sep 23, 2008 8:47 pm
Post by Devil Crx Tue Nov 10, 2009 1:39 pm
crx08;208312 wrote: and a 40/40 prop valve you can pull off a DA with out ABS
You don't NEED this. to complete the swap.
*GMR* CRX Superleggera
jerren, youre #5, now go put that in your sig.
crx08
Posts: 1142Joined: Tue Nov 28, 2006 1:45 am
Post by crx08 Tue Nov 10, 2009 3:42 pm
Devil Crx;208404 wrote: You don't NEED this. to complete the swap.
I did it when I did rear disc :dunno:
stl-imports.com/forums
Devil Crx
Posts: 1410Joined: Tue Sep 23, 2008 8:47 pm
Post by Devil Crx Tue Nov 10, 2009 3:53 pm
Thats fine. I'm not saying you can't use it or you shouldn't. I'm just saying everything will still work without it.
*GMR* CRX Superleggera
jerren, youre #5, now go put that in your sig.
crx08
Posts: 1142Joined: Tue Nov 28, 2006 1:45 am
Post by crx08 Tue Nov 10, 2009 4:00 pm
Yea. I looked around on Honda-tech and people were saying to use it. but I guess what ever way you want to go it would still work.
stl-imports.com/forums
Devil Crx
Posts: 1410Joined: Tue Sep 23, 2008 8:47 pm
Post by Devil Crx Tue Nov 10, 2009 4:03 pm
crx08;208413 wrote: Yea. I looked around on Honda-tech and people were saying to use it. but I guess what ever way you want to go it would still work.
They say alot of things on honda tech. I'm just saying your brakes will still work if you don't have a 40/40 prop valve readily available.
*GMR* CRX Superleggera
jerren, youre #5, now go put that in your sig.
rickles8099
Posts: 3038Joined: Mon Oct 30, 2006 7:53 am
Post by rickles8099 Tue Nov 10, 2009 5:14 pm
jerren is correct. the brakes will still work without changing the prop valve. however, the brake bias will be off if you swap the brakes and not the prop valve.
CRX91
Posts: 612Joined: Sat Aug 01, 2009 7:30 am
Post by CRX91 Sun Nov 15, 2009 10:26 pm
ok its on a 89 hf he got it of an si i drove his car and the fedal went far almost to the floor will that happen with out the prop valve and i looked at the rear brakes and it dont look like they are working. there was sufest rust on the disc cou
