turbo'n my car!!

JustRob · Post by **JustRob** » Mon Sep 03, 2007 3:56 pm

.:si:.;64376 wrote:ya well...
which ones
i like defi gauges or megan..
but
greddy emanage
hondata s300
chrom?
others?

I would say GReddy or Defi Gauges are some of the most accurate gauges on the market. I don't recommend E-Manage whatsoever. I'm not to big a fan of Crome, but John at Lowe has a lot of experience with it. Hondata S300 sounds like the best choice out of those.

.:si:. · Post by **.:si:.** » Tue Sep 04, 2007 2:16 pm

SilverStreak;64392 wrote:I would say GReddy or Defi Gauges are some of the most accurate gauges on the market. I don't recommend E-Manage whatsoever. I'm not to big a fan of Crome, but John at Lowe has a lot of experience with it. Hondata S300 sounds like the best choice out of those.

alright well right now i am gettin prices on turbo's from my buddy who works at a deisel shop and gets discounts from garrett...so right now im seeing how much a gt28rs is!

No Dig · Post by **No Dig** » Fri Sep 14, 2007 4:48 am

LOL @ THE SAME AMMOUNT OF BOOST ON DIFFERENT TURBOS IS THE SAME POWER! conversation.

No Dig · Post by **No Dig** » Fri Sep 14, 2007 4:49 am

.:si:.;64612 wrote:alright well right now i am gettin prices on turbo's from my buddy who works at a deisel shop and gets discounts from garrett...so right now im seeing how much a gt28rs is!

lol eldin?

haha. why dont you talk to justin about his ATP account? if you get a journal bearing turbo im going to laugh and poke at you.

.:si:. · Post by **.:si:.** » Fri Sep 14, 2007 2:53 pm

No Dig;67029 wrote:lol eldin?

haha. why dont you talk to justin about his ATP account? if you get a journal bearing turbo im going to laugh and poke at you.

we'll see how things go gary!!

92hatchproj · Post by **92hatchproj** » Wed Oct 03, 2007 4:14 am

lolzzzz if you wanna run more that 6 psi of boost then get some vitara pistons, and lower your compression ratio, then you can up the boost safley to more that 6 lbs, and yes, i'm brett with the yellow delsol.

JustRob · Post by **JustRob** » Wed Oct 03, 2007 4:27 am

92hatchproj;70829 wrote:lolzzzz if you wanna run more that 6 psi of boost then get some vitara pistons, and lower your compression ratio, then you can up the boost safley to more that 6 lbs, and yes, i'm brett with the yellow delsol.

LAWL! Vitaras in a B16. Have fun with piston slap Bahahahahahahahaha

Don't listen to this dude. Your B16 will be fine. They've been proven time after time to hold up to boost very well. Hell, look at 99BlackHatchs car and all the shit he put it through while it was boosted. It held up nicely until he forgot to check the oil.

.:si:. · Post by **.:si:.** » Wed Oct 03, 2007 4:29 pm

SilverStreak;70833 wrote:LAWL! Vitaras in a B16. Have fun with piston slap Bahahahahahahahaha

Don't listen to this dude. Your B16 will be fine. They've been proven time after time to hold up to boost very well. Hell, look at 99BlackHatchs car and all the shit he put it through while it was boosted. It held up nicely until he forgot to check the oil.

ya i noticed that people with b16s are holding up very well with boost...but i am putting the skunk2 turbo cams in my car then after a month or two i will most likely get crower rods and cp pistons.....

N2HIFI · Post by **N2HIFI** » Wed Oct 03, 2007 7:01 pm

92hatchproj;70829 wrote:lolzzzz if you wanna run more that 6 psi of boost then get some vitara pistons, and lower your compression ratio, then you can up the boost safley to more that 6 lbs, and yes, i'm brett with the yellow delsol.

you are no longer allowed to post n the tech section, you obviously don't know what your talking about. D-series cars stock bore are 75 mm (vitara pistons are 75mm bore) b-series cars are 81mm , so obviously 75mm pistons WILL NOT WORK in a 81mm bore.

thanks managment

.:si:. · Post by **.:si:.** » Wed Oct 03, 2007 7:09 pm

N2HIFI;70940 wrote:you are no longer allowed to post n the tech section, you obviously don't know what your talking about. D-series cars stock bore are 75 mm (vitara pistons are 75mm bore) b-series cars are 81mm , so obviously 75mm pistons WILL NOT WORK in a 81mm bore.

thanks managment

:lmao: LOL brett's really not that bad of a guy but he even admitted he was a noob.....lol but give him 1 break..happnes again then do something about it lol but i thought it was quite funny!