crx b18a halfshaft question????

zrs6v4 · Post by **zrs6v4** » Thu Jun 28, 2007 10:09 pm

wow I thought my derigging crx job was finally over.. but I guess not.

89 crx with 92 b18a LS motor and tranny

I was looking over my motor and noticed that now my passenger side halfshaft inner boot was leaking. I thought no big deal Ill buy a new halfshaft for $50 and swap it out again.. well I remembered he said something about an 89 integra halfshaft or something..

here is the issue the tranny is from a 92 integra and the hubs/rotors/ and possibly calipers are from an 89 1.6 integra. why he did this I have no Idea but when he origionally put the car together he built halfshafts that were half from and 89 and the inner half were from a 92(to fit the tranny.. well when I replaced the drivers side halfshaft I put one on from an 89 integra b/c thats what I thought he did at first... well I still didnt freak out and was hoping that for some reason the parts were the same, so I went to autozone.com and the part numbers for halfshafts from the 89 vs 92 were different numbers.. so now I am kind of lost on what to do. I just replaced the driver's side like 2 months ago and its new but if its the wrong one I am obviously going to replace it...

do I buy 2 new 92 halfshafts and hope they fit in the 89 hubs or what?

or do I need to buy 2 new hubs as well if so which ones? 92 integra?

thanks

zrs6v4 · Post by **zrs6v4** » Thu Jun 28, 2007 10:19 pm

I also have stock crx hubs if for some reason that would work..

zrs6v4 · Post by **zrs6v4** » Thu Jun 28, 2007 11:22 pm

I called hasport and he told me to use 90-93 integra axles...

Does that sound right?

I also am going to do a new clutch/flywheel since Ill be in there.. if anyone wants to help that would be awesome b/c I havent done a clutch job yet... I am going to do new shift linkage and a possibly new tranny as well, but Im not sure.. any clutch opinions? it is my DD

90CivicEx · Post by **90CivicEx** » Thu Jun 28, 2007 11:54 pm

Us 92 axles the hubs won't matter.

zrs6v4 · Post by **zrs6v4** » Fri Jun 29, 2007 12:10 am

now what clutch/flywheel should i use that is the best bang for the buck and good for daily driving and what tranny has the longest gears?(Im going to get a new tranny as well).