good or bad idea?

sharpie · Post by **sharpie** » Wed Feb 29, 2012 6:03 am

muha22752;288251 wrote:I say get a roof scoop, that way you will never get to hot. constint airflow is good.

This is hands down the greatest idea you have ever had.

sirricealot · Post by **sirricealot** » Wed Feb 29, 2012 7:23 am

sharpie;288263 wrote:This is hands down the greatest idea you have ever had.

x2

or get some plexiglass and silicone caulking....

opntrk86 · Post by **opntrk86** » Wed Feb 29, 2012 1:55 pm

Or you could do it the correct way and replace the entire roof skin with a non-sunroof one.

1. Cut out the windshield & back-glass
2. Remove the two moldings on each side of the roof
3. drill out the spot-welds, remove old roof
4. align new roof
5. plug weld in the old spot weld locations
6. paint

muha22752 · Post by **muha22752** » Wed Feb 29, 2012 2:51 pm

http://www.bodykits.com/Honda/Civic-2Dr ... od-Scoops/

Waffles · Post by **Waffles** » Wed Feb 29, 2012 3:07 pm

Your roof needs a pro mod hood scoop.

http://www.knfilters.com/images/press/scoop1.jpg

muha22752 · Post by **muha22752** » Wed Feb 29, 2012 5:14 pm

Oh ya, with that thing you could delete the whole climate control unit. Now that is saving weight.

getteg · Post by **getteg** » Thu Mar 01, 2012 12:36 am

opntrk86;288268 wrote:Or you could do it the correct way and replace the entire roof skin with a non-sunroof one.

1. Cut out the windshield & back-glass
2. Remove the two moldings on each side of the roof
3. drill out the spot-welds, remove old roof
4. align new roof
5. plug weld in the old spot weld locations
6. paint

7. Install front and rear glass.

You have to make sure you include all steps. He may have forgotten to put them back in and then had a bird fly through the window and knock him out. Safety first!

opntrk86 · Post by **opntrk86** » Thu Mar 01, 2012 1:48 pm

opntrk86;288268 wrote:Or you could do it the correct way and replace the entire roof skin with a non-sunroof one.

1. Cut out the windshield & back-glass
2. Remove the two moldings on each side of the roof
3. drill out the spot-welds, remove old roof
4. align new roof
5. plug weld in the old spot weld locations
6. paint
7. install windshield and back-glass (optional)

Fixed