-remove bumper & headlights
- remove lights/rubber from unit
- 8 minutes at 200 degrees on tray
- start prying with a screwdriver and take apart headlight you may have to put back in the oven for like 3 more min. if it gets hard. the second one will be easier because you know what your looking for.
-tape off turnsignal area
- prime
- paint light coats (I used phantom grey, lots of other people use a charcoal metallic paint, doesnt have to be high temp.)
-let dry for a while
- put the housing back togther i applied ALOT of extra silicone and squished it together, put back in oven for 8 more min. then take out of oven and squeeze togther make sure the tabs are over eachother.
- put lights back togther and your done.
if you have any questions just ask. sorry for the cell phone pics you get the point.
thanks for your time.
