turbo?

Gunmetal Si · Post by **Gunmetal Si** » Sun Jan 21, 2007 2:48 pm

stolle;14920 wrote:yeah sorry i couldnt get off friday and i have been busy, i went and tryed to work on it friday night but forgot the keys to my shed so i couldnt get the parts had out :frown:

well things you will need or might not need...

1. 4 quarts synthetic oil, oil filter
2. gm water pump heater core bung in the help section at the parts store. i use them for the return line.
3. 5/8" heater hose or whatever size on the return on the turbo parts store again usually eyeball the one that looks right one thats prebent. (if you use just a peice of hose and bend it when it warms up it will kink)
4. oil pan gasket, might need might not.
5. obd1 chipping kit from www.xenocron.com, this i dont know about since your going to be using a y8 you might want to get a p28 to chip instead of your p06.
6. some piping for the wastegate
7. vacuum hose

keep in mind you dont have to use exactly what i do, i go on the cheap but it works i may have missed some things but its a good start...

edit: you will also need parts to hook the exhaust up.

you can get the stuff to chip at gateway electronics for under 5 buks.

stlmadpanda · Post by **stlmadpanda** » Sun Jan 21, 2007 4:02 pm

the chip for your ecu for under 5 bucks? what? Are you serious? Ha ha sorry for whoring:(

Post by **stolle** » Sun Jan 21, 2007 6:06 pm

GUNMETAL SI;14953 wrote:you can get the stuff to chip at gateway electronics for under 5 buks.

yes you can and we have gotten stuff to chip ecus there its where i got all my sockets. the problem, theres never a guarantee they will have what you need and the quality is sometimes not there some of the parts are used or 20+ years old. which is why i always tell people to go to xenocron.com and buy a chipping kit for obd1 ecus all the parts are brand new and good quality.

stlmadpanda;14956 wrote:the chip for your ecu for under 5 bucks? what? Are you serious? Ha ha sorry for whoring:(

you can get the parts to chip the ecu for under 5 bucks if your lucky and can find what you need at gateway electronics or electronics exchange even radioshack have some parts you need.

stlmadpanda · Post by **stlmadpanda** » Sun Jan 21, 2007 6:14 pm

huh did not know that
interesting

JustRob · Post by **JustRob** » Sun Jan 21, 2007 6:40 pm

What about bigger injectors? :dunno: Oh, and I have a chipped P28 that I'm selling right now. PM me if your interested. I'll come by whenever you guys install this turbo setup.

95_gsrfodo · Post by **95_gsrfodo** » Sun Jan 21, 2007 6:44 pm

SilverStreak02;14992 wrote:What about bigger injectors? :dunno: Oh, and I have a chipped P28 that I'm selling right now. PM me if your interested. I'll come by whenever you guys install this turbo setup.

will that ecu work with the setup im getting and buy the way already have blue top 450s and a resistor box

mike · Post by **mike** » Sun Jan 21, 2007 6:47 pm

you got pwned by ssauto crap.... have you paid for it yet? you should return it if you still can.

Waffles · Post by **Waffles** » Sun Jan 21, 2007 6:49 pm

mike;14994 wrote:you got pwned by ssauto crap.... have you paid for it yet? you should return it if you still can.

I dont know I think this might be another chap company, notice how the manifold is cast and not the SSCrap manifold.

mike · Post by **mike** » Sun Jan 21, 2007 6:52 pm

whatever you wanna call it ssauto/ xspower/ jdmturbo... its crap

dont waste your money

95_gsrfodo · Post by **95_gsrfodo** » Sun Jan 21, 2007 6:54 pm

btlfedgolf;14997 wrote:I dont know I think this might be another chap company, notice how the manifold is cast and not the SSCrap manifold.

tru iand they say lifetime warr. on the mani as well wtf ever its cheap and its a start that can start upgrading it as i can... havent paid yet was wating till monday to pay credit card

unless someone here can get me a kit around 500-700 range