Fastest STL Drag radial time????

User avatar
sharpie
Posts: 3564
Joined: Tue Nov 21, 2006 8:59 pm

Fastest STL Drag radial time????

Post by sharpie »

02Type-S;239715 wrote:1/8 mile is gay. That is all.
its all some people have.
gudg racing you're never gonna catch me!!
JustRob
Posts: 7884
Joined: Sat Nov 18, 2006 7:28 pm

Fastest STL Drag radial time????

Post by JustRob »

96civic cr-v;239712 wrote:Hey mike take a look at this....

http://honda-tech.com/showthread.php?t=2807228
Sick. This makes me miss my Honda even more.
racergti
Posts: 30
Joined: Mon Mar 19, 2007 4:04 am

Fastest STL Drag radial time????

Post by racergti »

10.98 @134 on M&H 205-60/13 dot's



Image

this is a fun thread to watch. I want to see the showdown.
User avatar
96civic cr-v
Posts: 401
Joined: Thu Nov 29, 2007 1:43 am

Fastest STL Drag radial time????

Post by 96civic cr-v »

That thread on ht is not my slip. It is a slip to show mike that a Honda that ran a 7.2x @100 and still ran 10's. I ran a 7.21 @111 on m&h 235/65/15...what is your 1/8 Racegti?
Image
Built & Tuned by Reeves Racing 1(573) 820-3198
Sonsors:Reeves Racing, pureevilkustoms, xenocron
racergti
Posts: 30
Joined: Mon Mar 19, 2007 4:04 am

Fastest STL Drag radial time????

Post by racergti »

On the 10.98 pass, the 1/8 was 7.3 @ 103 but later that night managed a 7.1 @ 105.
boostedld9
Posts: 33
Joined: Thu Jan 25, 2007 12:59 am

Fastest STL Drag radial time????

Post by boostedld9 »

i think you'll hit 10s i wish my 1/8mile times where better, i run 7.5 @97 with a 11.4@135 1/4 thats on slicks tho but by time your at the 1/8 you have traction. you know what kinda power your car is putting out?
User avatar
5thgen
Posts: 1097
Joined: Tue Nov 21, 2006 10:25 pm

Fastest STL Drag radial time????

Post by 5thgen »

From a pure test and tune point of view, the 1/8th mile is all you need.

If you have traction problems past the 1/8th...I would start looking at pressure/suspension setup.

Top Fuel must be gay....

they only go 1000' feet....fags....
Image
User avatar
mike93hatch
Posts: 2869
Joined: Tue Dec 05, 2006 5:42 am

Fastest STL Drag radial time????

Post by mike93hatch »

5thgen;239759 wrote:
Top Fuel must be gay....

they only go 1000' feet....fags....
uhh no, they run 1/4 mile unless there is unsufficient room to slow down...depends on the track. faggot.
User avatar
twkdcd595
Posts: 1847
Joined: Fri Jun 22, 2007 4:55 pm

Fastest STL Drag radial time????

Post by twkdcd595 »

NHRA's 2 Top Fuel classes were changed to only run 1000' for all tracks after the investigation into the accident that killed Scott Kalitta... in addition to the other safety devices that are now required to deploy the chutes automatically, turn off the fuel pump, etc.

... and all of you can suck a fart out of his ass (*points at closest random person*).

Sheesh its hot outside.

Mike you seen the Speed Factory D series build? Unfortunately they smoked the original project motor but damn even that Vitara motor was doing work. I am suprised with what we are seeing from some of these D series you have not leaned on yours more.
-3000 lbs of sneezing Unicorn.
Image

-God bless the men and women of the U.S. armed forces!
User avatar
sharpie
Posts: 3564
Joined: Tue Nov 21, 2006 8:59 pm

Fastest STL Drag radial time????

Post by sharpie »

mike93hatch;239768 wrote:uhh no, they run 1/4 mile unless there is unsufficient room to slow down...depends on the track. faggot.
they race 305 meters not 400 like they used to, its been like this for about a year and a half
gudg racing you're never gonna catch me!!