The Boger (coming back to life)

Redline · Post by **Redline** » Mon Apr 23, 2012 10:38 pm

well everyone knows this car and yes its a whore but i decided to make a few upgrades since i purchased her from JustRob

how she sat when i got her.

the day i got the car the single cam came out cause rob was keepin it and ls turbo on 10psi went it

getting on it for the first time, 3rd gear at 10psi from 60
http://www.facebook.com/photo.php?v=271 ... =2&theater

next i had to work on my piping a little to get teh bumper to fit but car turned out looking ok for a quick throw together

after that i went to the track and tryed to dail in my suspenion and have some fun. ran a 13.8 at 108 2.4 60ft, just wasnt fast enough but still spanked a procharged mustang.....

next came more boost and alittle street tuning 15psi was just more fun

i ran a 13.2 at 113, 60ft was 2.43 traction is a major issue
http://www.facebook.com/video/video.php ... 0838546244

racing onecam12sec in his b20vtec hatch, his 60ft was way better than mine

then i put together a few cars meet and got some street cred and started to get called out by everyone. long story short i was running the shit out of my car.

then came more boost again 18psi on a shity tune. but car was quick as shit

another random video
http://www.facebook.com/photo.php?v=2558761668028

me racing a 380hp 432tq superchaged gsx ragal
roll
http://www.facebook.com/photo.php?v=10150675320609064
dig
http://www.facebook.com/photo.php?v=10150675322579064

later that night after the regal i was out doing some racing again a built 2004 mustang and the worst thing happen.... boom cracked a piston in 3rd gear, didnt car still slammed 4th and pulled away from the mustang. 11 quarts of oil later i made it home.

then i towed it to my storage lot for the new setup

and now the car sits with the motor pulled ready for the new setup to go in this week, motor goes together tomorrow.

b18a1
eagle rods
je pistons 9.5 to 1
crower valve train
crower stage 2 turbo cams
arp everything
hondata 4bar map
550cc injector soon be be 1000cc
innovative motor mounts
full race tractions bars
and slicks for the track

going to tune on whatever psi puts me at 350hp on the dot, then get new injectors and retune on 25psi. as soon as i get dyno numbers i will post them.

92_luder · Post by **92_luder** » Mon Apr 23, 2012 11:19 pm

this sounds awesome, cnt wait

sammybammy · Post by **sammybammy** » Mon Apr 23, 2012 11:30 pm

Such a sick car. Can't wait to see it run with the new engine.

02Type-S · Post by **02Type-S** » Tue Apr 24, 2012 3:40 am

Nice! Should be fun

Redline · Post by **Redline** » Wed Apr 25, 2012 4:57 am

well i got some work done today, also thats dan aka smilingShadow in the pictures helping me out

on the stand

arps in baby

put the head on

lube some shit up.

o ya cams

putting on the belts

installing new pan

almost done got a few things to do but its together

then went for a little cruz with a old friends

wanaboostDC2 · Post by **wanaboostDC2** » Wed Apr 25, 2012 1:30 pm

I need to get off my ass and work on my LS!!!

gcef89 · Post by **gcef89** » Wed Apr 25, 2012 2:30 pm

nice build thread and that da is really clean!

Redline · Post by **Redline** » Wed Apr 25, 2012 3:14 pm

That da was bought from oringal owner a week ago 60xxxx miles and no rust at all, got it super cheap also

Redline · Post by **Redline** » Fri Apr 27, 2012 2:36 am

Put motor in today. Got it running. Idle is a shity but thats due to untined and cams. Few small issues to fix then tune. stage 5 clutch and solid mounts = shity test drive

bks · Post by **bks** » Sat Apr 28, 2012 5:54 pm

Nice car!

Tell your buddy to check the front radius rod bushings, they seem worn. Or he has bent suspension pieces