Zeikial2000's EK9 wannabe build thread!!!!!!!

zeikial2000
Posts: 23
Joined: Sat Jan 21, 2012 2:58 am

Zeikial2000's EK9 wannabe build thread!!!!!!!

Post by zeikial2000 »

Hello all, my name is Vinson but all my friends call me Vinnie you may call me whatever you like. Im pretty excited to make some new friends in different places! Figured id post up the my DD project for everyone to see, 98' Dark Amethyst Pearl EK hatch (EJ6) i bought it on (2-25-2011) from some guy for $3500 it had an LS swap in it which looked like it was just slapped in in a matter of hours, not very well done at all. I was told it is lowered on springs in the front and sleeve overs in the rear, looked good but made for a very bumpy uncomfortable ride. It had an aftermarket sunroof put in shotily so the roof is dented and wavy. As far as i can tell its been wrecked at least once, had a different core support put in, and was repainted the headlights and hood didnt line up very well and the headlights themselves were falling apart. So needless to say the thing needs some work but it will get there slowly but surely! I will post a picture timeline to show what has been done to her up until this point.

Here she is the day i bought her!

Image

The replacement suspension i ordered (2-26-2011)

Image

Replaced a couple of mounts (2-27-2011)

Image

Image

Image

Image

Suspension arrived (3-4-2011)

Image

Image

Install (3-6-2011)

Image

Image

And wouldn't ya know it, the front was already lowered on S2 springs lol

Image

Image

And it was obvious the rear had gone to crap a long time ago with as much greasy nastyness the ebay sleeve overs had all over them :angry:

Image

I was so concerened about getting it done and getting it done right that i totally forgot to take after pics so sorry about that

Oh and before i forget i swapped out the muffler that came on my car for a friends old muffler off of his EG hatch, it looks and sounds much better now! (3-7-2011)

Before:

Image

After:

Image

When i first bought the car the first thing i noticed was that the headlights were in bad shape, they were foggy you could barely tell they were on at night and the first time i popped the hood i realized they were in worse shape then originally percieved. Most if not all off the tabs were broken and they were litereally falling apart, so i went ahead and ordered a new set along with some 10k HID's

Image

Image

Image

It was hard to get a pic to show just how good they looked but take my word they looked much better than the old ones, and they werent falling apart lol

Image

I did a console console swap with one of my friends that also owns a hatch because i personally hated where the armrest was located and he wanted an armrest so it worked out for the both of us. I also installed a Wink mirror for better visability while driving

Old one
Image

Newish one

Image

Wink Mirror

Image

Also as many of you know, the longer you have a car the more you start to notice problems with it as have i. I mean i noticed in the beggining that the core support on my car was a little rough but a little rough became a huge understatement the more i got to looking at it. Originally i only noticed something was wrong because my front end wasn't lining up so me and my friend Kyle that owns his own body shop just planned on fixing it but after i had taken a detailed look at it i came to the conclusion that it was beyond repair and would simply need to be replaced along with the roof of my car. One of the other significant issues with the car was the motor and tranny, i had absolutely no idea how many miles were on either of them, they both leaked fluid, and the tranny would grind going into 3rd gear. Luckily i had a "spare" motor swap sitting in my garage :naughty:

I finally got some wheels for her, when the guy i traded with described them to me i was under the impression that they were Rota Slips but they turned out to be Drag DR-23's which is fine because they are almost identical, im pretty happy with the way they look personally and most if not all of the criticism i've recieved has been positive. Here are a couple of pics!

The night i got them (4-17-2011)

Image

And for reference, Before:

Image

After:

Image

So you remember that "spare" motor swap i said i had laying around!? Well....

What was in it!

Image
www.truformonline.com

93' Del Sol (Scrapped :()
93' ITR swapped sedan (Traded)
98' EJ6 Hatch (Daily)
08' Caliber SRT-4 (Family Car)
zeikial2000
Posts: 23
Joined: Sat Jan 21, 2012 2:58 am

Zeikial2000's EK9 wannabe build thread!!!!!!!

Post by zeikial2000 »

It was pulled on (6-5-2011)

Image

Image

Image

My friend Adam helping me drop the swap in

Image

Image

Image

When all was said and done it took me a week and 4 days to complete the swap from start to finish, and being that 95% of the swap was done myself and that this was the first motor swap ive EVER done id say that was pretty good especially since it fired the first time i went to crank it with no major issues :))

Heres a video taken by my friend Aaron of the first start up after i tightened and wired everything. (6-17-2011)

‪B16A swapped EK hatch first start up‬‏ - YouTube


Oh and remember how i was saying that the front end really needed to be fixed!? Well 2 days after finishing the motor swap i decided it was time to fix my front end as well lol, so i dropped it off to my friend Kyles shop to fix the damage and replace my front clip with a 99-00 front end simply because i like that style much better then the 96-98 front, so here is how she sits as of right now!

Old core support and old front end removed (7-25-2011)

Image

On the frame rack about to be pulled (7-26-2011)

Image

Mocked up to see how everything lines up (7-27-2011)

Image

So thats it for now but there is plenty more to come later.
www.truformonline.com

93' Del Sol (Scrapped :()
93' ITR swapped sedan (Traded)
98' EJ6 Hatch (Daily)
08' Caliber SRT-4 (Family Car)
zeikial2000
Posts: 23
Joined: Sat Jan 21, 2012 2:58 am

Zeikial2000's EK9 wannabe build thread!!!!!!!

Post by zeikial2000 »

Finally got her back on (8-1-2011)

Image

Image

Image

the reason the front end is black is because i couldnt afford to have it painted right now and there are a few more things i want to get fixed and/or installed beforehand then i plan on getting the entire car painted all at once

Bought a header off a friend for $50

Image

Installed (8-4-2011)

Image

Image

Me and a couple of my buddies working on our cars last night to get ready for a little cruise today, my car, my buddies EP3, and my other friends S2000

Image
www.truformonline.com

93' Del Sol (Scrapped :()
93' ITR swapped sedan (Traded)
98' EJ6 Hatch (Daily)
08' Caliber SRT-4 (Family Car)
zeikial2000
Posts: 23
Joined: Sat Jan 21, 2012 2:58 am

Zeikial2000's EK9 wannabe build thread!!!!!!!

Post by zeikial2000 »

I'm back again with some more updates, enjoy :))


Bought a Mishimoto radiator, fan shroud, and silicone hoses (arrived 9-9-11)

Image

Image


Installed (9-17-11)

Image

Image

Finally rolled over 150,000 miles on the chasis (9-24-11)

Image

Took my header and intake off to get polished for a local meet, while they were off i figured i'd take care of something i've wanted to get done since the motor swap and repaint my valve cover. I was actually pleasantly surprised with how clean the cylinder head was when i removed the cover (10-14-11)

Image

Aircraft paint stripper at work

Image

Image

Image

Image

Finished product, finally no more oil or oily finger prints all over it. Its kind of hard to tell in this pic. how nice it is but it looks 10 times better in person and no i didnt leave the letters painted i re polished them.

Image

While waiting for my header and intake to be finished getting polished one of my friends offered me a Skunk2 intake manifold for a price i couldnt resist :)

Image

Intake finished

Image

Finally got the IM, the intake, and the header on the day of the local meet here is the end result

Image

And here is the video of that same meet, look for my car at the 1:17 time marker

[ame="http://www.youtube.com/watch?v=8NPxrdnJicM"]TruForm Fall Meet 2011 - YouTube[/ame]


And last but not least.....


Image

Bought an OEM EK9 spoiler :drool: (arrived 11-22-11)

Image
www.truformonline.com

93' Del Sol (Scrapped :()
93' ITR swapped sedan (Traded)
98' EJ6 Hatch (Daily)
08' Caliber SRT-4 (Family Car)
User avatar
Thatoneguy
Posts: 639
Joined: Fri Aug 15, 2008 4:53 am

Zeikial2000's EK9 wannabe build thread!!!!!!!

Post by Thatoneguy »

Very clean and simple car. I like it. Not over the top with mods but it has classy taste.
zeikial2000
Posts: 23
Joined: Sat Jan 21, 2012 2:58 am

Zeikial2000's EK9 wannabe build thread!!!!!!!

Post by zeikial2000 »

Thatoneguy;284552 wrote:Very clean and simple car. I like it. Not over the top with mods but it has classy taste.
Thank you, i only plan on making it cleaner once i get my tax return. I've already got my Type R style front lip, grille, and PWJDM side markers sitting in my closet along with my CTR wing i may also be installing an EDM rear fog light. Just trying to get it as aesthetically pleasing as i can before IA 12'
www.truformonline.com

93' Del Sol (Scrapped :()
93' ITR swapped sedan (Traded)
98' EJ6 Hatch (Daily)
08' Caliber SRT-4 (Family Car)
User avatar
5thgen
Posts: 1097
Joined: Tue Nov 21, 2006 10:25 pm

Zeikial2000's EK9 wannabe build thread!!!!!!!

Post by 5thgen »

Very nice, nothing looks like its just thrown together.
Image
User avatar
DizzyB
Posts: 54
Joined: Tue Oct 21, 2008 3:30 pm

Zeikial2000's EK9 wannabe build thread!!!!!!!

Post by DizzyB »

Thatoneguy;284552 wrote:Very clean and simple car. I like it. Not over the top with mods but it has classy taste.

I agree. Good work.
zeikial2000
Posts: 23
Joined: Sat Jan 21, 2012 2:58 am

Zeikial2000's EK9 wannabe build thread!!!!!!!

Post by zeikial2000 »

Thanks everyone i really appreciate it
www.truformonline.com

93' Del Sol (Scrapped :()
93' ITR swapped sedan (Traded)
98' EJ6 Hatch (Daily)
08' Caliber SRT-4 (Family Car)
User avatar
02Type-S
Posts: 3513
Joined: Thu Jan 17, 2008 10:21 pm

Zeikial2000's EK9 wannabe build thread!!!!!!!

Post by 02Type-S »

Wow, very nice. I love EKs, once everything is painted it will really be nice.
I DETAIL CARS - PM ME
2002 Acura TL-S

A-Spec - BuddyClub - Rays - Falken - Cusco - K-Sport - SPC - Rotora - Injen - APEXi - Spoon - Mugen - Audiobahn

1998 Acura IntegraSkunk2 - Blox - Blackworks - Injen - DDM - Konig

Image
Team Arsenic - Vice Pres.