My 91 HB semi-build

JustRob · Post by **JustRob** » Thu May 13, 2010 5:37 am

Capt'n Obvious;232374 wrote:hmm never heard of the g motor do you mean j?

Honda actually made a G-Series motor. It's an inline 5-cylinder used in the 92+ Acura Vigor and the 95-98 Acura TL 2.5.

Honda has a series of motors for every letter A-N with the exclusion of the letter 'I'.

Edison Carasio · Post by **Edison Carasio** » Thu May 13, 2010 11:49 am

I always wondered why no body used the G for swaps back in the day.

Type: In-line 5 cylinder, aluminum block and head
Valve Configuration: SOHC, with 4 valves per cylinder
G20A1

Displacement: 1,990 cc (121 cu in)
G25A1

Displacement: 2,451 cc (149.6 cu in)
Bore: 85.0 mm (3.35 in)
Stroke: 86.40 mm (3.402 in)
Compression ratio: 9.0:1
Max Power: 176 hp (131 kW) @ 6300 rpm
Max Torque: 170 ft·lbf (230 N·m) @3900
Redline: 6800 rpm
Fuel Cutoff: 7100 rpm

GAWear · Post by **GAWear** » Thu May 13, 2010 5:18 pm

Sweet now my thread is educational also :w00t:

GAWear · Post by **GAWear** » Sat May 15, 2010 3:43 pm

Got the interior pieces painted and you guys are correct looks kinda shitty. Next pick n pull trip I will be finding new interior pieces.

I will post pics when it's sunny out.

Ordering the exhaust today

Which means she will be legal in a week or so.

on a sad note I was looking over the car in deepth yesterday and the driver side rear quater looks like it's fine but when you like in from the wheel well yep it's rust and been painted over FML!

90HtchBk · Post by **90HtchBk** » Sat May 22, 2010 11:35 pm

GAWear;232004 wrote:Damn.....Looks like I am going to be putting some stock springs back on it if I can find them. My drive way isn't even like real unlevel or anything but I drag in that so I don't wanna screw more stuff up with the car.

I might have some , PM me

GAWear · Post by **GAWear** » Sat May 22, 2010 11:41 pm

90HtchBk;233544 wrote:I might have some , PM me

Sent!

Update:

Got a Integra arm rest console from Chris now just looking for the shifter cup holder section to finish that up.

Got a fun little project for Monday........

1. Wrap new console arm rest. (with some nice dark blue crushed velvet or whatever else catches my eyes at the fabric store :w00t:)

2. Put on exhaust (assuming it get's here at a reasonable time)

3. Fix speedo (hopefully not sure if she come loose or what but never worked well and when we try to fix the heater core it hasn't worked since.)

Pics Tuesday of updates and some whole car under hood, back, etc

GAWear · Post by **GAWear** » Tue May 25, 2010 3:49 pm

*UPDATE*

So it's offical this is no longer a semi build but more then anything a full build body wise :violent4:

Got the exhaust in yesterday....headed over to my dad's as he knows how to weld so we could install it to find some just awesome things.

1. Cat has a hole in the bottom from the dumb ass kid cutting it off and letting it scrap and drag.

2. Driver side front fender at the bottom is rusted out and not even attached to the bolt.

So what we are trying to do at this point is taking a piece of melt and rewelding it on the cat since I don't have the extra money at this point to fork out for a new cat.

Went to weld to only find out my dad left the gas on the last time he welded so it was out of gas lmao......He just wasted $80 worth of gas

Anyways he is taking it to my grandpa's today to weld it and we shall see if we get the exhaust on tonight :PDT_kar:

Pic 1 is the broken pieces of the comb that came out of the cat. Half of the comb was still attached so we left that.

Pic 2 is a crappy pic but is the rusted fender

Pic 3 car up on the stands

GAWear · Post by **GAWear** » Sat May 29, 2010 3:33 pm

Picture of the exhaust before hand......

Update:

Still working on crap.....Fixed the cat and have the cat along with mid-piping on the car. Now working on adding piping because the exhaust is made for a CRX so we are trying to find some exhaust flanges and everytime I go to order them from exhaust shops locally they can't get them wtf?

I am hoping we can get something going.

GAWear · Post by **GAWear** » Mon Jun 07, 2010 3:55 pm

Little bit of an update for now......Wednesday I am working on the car all day so I will have LOTS of pictures on Thursday. :partydance:

So after really paying attention to the body I find BONDO :assault:

FML!!!!!!!!!!!

Pictures are crap phone pics but there is bondo all over the bottom and you can even see the shaping is different.

1st pic shows the bondo that is showing

2nd pic shows shapping

3rd pic which you can't really tell but shows bubbles which I am guessing is soon to be rust?

Edison Carasio · Post by **Edison Carasio** » Mon Jun 07, 2010 4:06 pm

You're making progress! Keep it up.