my DCwhore
-
chaunce
- Posts: 141
- Joined: Sun Sep 13, 2009 4:23 pm
my DCwhore
how did you get the wiper outtt????
-
Capt'n Obvious
- Posts: 2973
- Joined: Fri Jun 22, 2007 4:11 pm
-
SLAMDcfour
- Posts: 219
- Joined: Fri Mar 12, 2010 2:20 am
my DCwhore
Theres a writeup on TI but basically theres 3 plastic panels (2 on sides of window- pull off 1st) theyre all clip ons so its easy to pop off. then you need i think a 10mm socket to remove the motor, and you can buy a plug for $5 online or fashion your own and seal the backside with some silicon. its pretty simple but, good luck!chaunce;226022 wrote:how did you get the wiper outtt????

Keep It Clean
-
chaunce
- Posts: 141
- Joined: Sun Sep 13, 2009 4:23 pm
my DCwhore
thanks ima give it a try nowSLAMDcfour;226050 wrote:Theres a writeup on TI but basically theres 3 plastic panels (2 on sides of window- pull off 1st) theyre all clip ons so its easy to pop off. then you need i think a 10mm socket to remove the motor, and you can buy a plug for $5 online or fashion your own and seal the backside with some silicon. its pretty simple but, good luck!
-
willworkforhondas
- Posts: 294
- Joined: Thu Oct 08, 2009 10:29 pm
my DCwhore
[Today 01:32 PM] rickles8099: if you dont like it, theres a log out button at the bottom of every page[Today 01:47 PM] rickles8099: willworkforhondas = god
-
SLAMDcfour
- Posts: 219
- Joined: Fri Mar 12, 2010 2:20 am
my DCwhore
I hope he remembers to put a wire nut on it lol..
you have to start disassembling from the outside first too
- take cap off, remove nut, remove blade.
you have to start disassembling from the outside first too
- take cap off, remove nut, remove blade.

Keep It Clean