So, in the next few days, I'm picking up a Acura RL (KA9)

Waffles · Post by **Waffles** » Mon Mar 21, 2011 3:44 am

I do like that front end alot better.

SlowOne.5 · Post by **SlowOne.5** » Mon Mar 21, 2011 3:54 am

Kind of wish I would've stuck around now, but I had to finish my own car. Looks good.

99BlackHatch · Post by **99BlackHatch** » Mon Mar 21, 2011 3:59 am

I currently have the fogs setup in the highbeam location until I get tthe factory HIDs wired up correctly...

Also thinking about switching the fogs with the high beams since they have the same bulbs... having my high beams in the bumper lights and having the yellow fogs on the inside of the headlight next to the grill.

eh2_Erik · Post by **eh2_Erik** » Mon Mar 21, 2011 5:45 am

That front end looks legit, is it just a newer year? and what after market wheels are those?

99BlackHatch · Post by **99BlackHatch** » Mon Mar 21, 2011 11:55 am

The big wheels posted up a bit ago are 19x8 +35 Racing Hart Evo's.

And yes, the new front end is off the same model RL, but it's the 99-04 front end... Just like the Ek's had the EM1 front end facelift, the Integra too... The RL got the same treatment. So pretty much it was another car that got the Zenki and Kouki front ends.

SLAMDcfour · Post by **SLAMDcfour** » Mon Mar 21, 2011 8:46 pm

New front end looks great, the wheels look an inch too big though, i'd like to see 18"s with some dish

99BlackHatch · Post by **99BlackHatch** » Mon Mar 21, 2011 8:56 pm

Hard to find a set of wheels for a Honda that would give you a big dish. I'm working on it, but considering the crappy offsets that we have, it takes some work, but I'll get there

SLAMDcfour · Post by **SLAMDcfour** » Tue Mar 22, 2011 7:11 am

99BlackHatch;259617 wrote:Hard to find a set of wheels for a Honda that would give you a big dish. I'm working on it, but considering the crappy offsets that we have, it takes some work, but I'll get there

I know what you mean. What's your PCD?

99BlackHatch · Post by **99BlackHatch** » Tue Mar 22, 2011 11:50 am

Pitch circle diameter?

99BlackHatch · Post by **99BlackHatch** » Tue Mar 22, 2011 3:06 pm

After getting the car aligned yesterday from the help of Rick / SleepyCivic... I need to pick up some front and rear camber kits and also a toe adjuster on the rear as well...

Front are...
Front driver's side has -4.2* camber (due to the accident from befor I picked it up)
Front pass. side has -3.5* camber

Rears are...
driver's side is -3.5*
pass side is -3.5*