JustRob's '09 Build Thread

gsrauto98 · Post by **gsrauto98** » Tue Apr 14, 2009 9:11 pm

so pretty:bouncy:

Tyler · Post by **Tyler** » Tue Apr 14, 2009 9:21 pm

Thats a biggun. What made you go with the sc61?

JustRob · Post by **JustRob** » Tue Apr 14, 2009 11:30 pm

Tyler;175468 wrote:Thats a biggun. What made you go with the sc61?

Seeing what other setups similar to mine were running. As well as making it a usable turbo in the future when I build a bigger bottom end.

I updated my first post with my list of plans. Along with what I do and do not have yet.

JustRob wrote: [X]B16A Block Decked and Bored for Forged Internals
[X]JE Pistons "Flat-Top" 81mm 10.0:1 Forged Pistons (Makes the motor 9.31:1 after the block being decked)
[X]Crower 4340 Steel Billet Connecting Rods
[X]ACL Race Series Main and Rod Bearings
[X]Golden Eagle Oil Squirter Block-Offs
[X]Golden Eagle Head Studs
[X]Moroso High Capacity Oil Pan
[ ]Moroso High Capacity Oil Pickup
[ ]King Motorsports Extended Oil Pan Studs
[ ]BLOX Magnetic Oil Drain Plug
[X]mFactory Oil Filter Block Adapter
[X]Stealthmode Performance Oil Restrictor Valve
[X]Stealthmode Performance -3AN Oil Feed Line
[ ]Earl's -10AN Oil Return Line
[X]Endyn Breather Kit

[X]B16A Head
[X]GSR Camshafts
[X]ITR Dual Valve Springs
[ ]3-Angle Valve Job and Rebuild
[ ]Buddy Club Racing Spec Gold Cam Gears
[X]Custom Shaved Valve Cover
[ ]Buddy Club Black Oil Cap
[ ]King Motorsports Extended Manifold Studs
[X]NextGear Thermal Intake Manifold Gasket
[ ]Edelbrock Victor X Intake Manifold
[ ]Inline Four Thermal Throttle Body Gasket
[ ]Professional Products 65mm Throttle Body
[ ]AEM Fuel Rail
[ ]Bosch 1000cc High Impedance Fuel Injectors
[ ]Aeromotive A1000 Fuel Pressure Regulator
[ ]Aeromotive A1000 Fuel Pump
[ ]Full-Race Sump Kit
[ ]Earl's -10AN Stainless Fuel Lines

[X]HTP A/C Mini-Ram Manifold
[X]HTP Open Wastegate Dump Tube
[X]TiAL 38mm External Wastegate
[X]Precision SC61 Turbo
[X]HTP 2.5in. Downpipe
[ ]Custom Charge Piping
[ ]Go Autoworks Medium Intercooler (28x7x2.5)
[X]GReddy Type S Blow-Off Valve
[ ]Silicone Couplers and T-Bolt Clamps

[X]Crome Chipped P06
[ ]Benen Black ECU Cover
[X]MSD 3 Bar Map Sensor
[X]AEM UEGO Wideband
[ ]AEM Boost Gauge
[X]Honda S2000 Gauge Cluster
[X]Autometer Gauge Bezel Pod

sharpie · Post by **sharpie** » Tue Apr 14, 2009 11:34 pm

JustRob;175465 wrote:

looks cute

Silver Knight · Post by **Silver Knight** » Wed Apr 15, 2009 5:44 am

i hate you Rob.

little kids shouldn't be playing with grown up toys.

JustRob · Post by **JustRob** » Wed Apr 15, 2009 5:44 am

I test fitted the turbo tonight and the manifold is definitly not going to work with my setup this time. The problem isn't the turbo, but its the oil pan. This pan puts my return line drian all the way on the timing belt side of the motor while the drain on the turbo is all the way in front of cylinder number 4. I think this is going to cause issues so I'm going to sell this manifold, downpipe and dumptube and get a new one from Go Autoworks. Heres some shitty pics.

Silver Knight · Post by **Silver Knight** » Wed Apr 15, 2009 5:47 am

love the last pic. looks like something an auto shop would put on their website

sharpie · Post by **sharpie** » Wed Apr 15, 2009 5:54 am

nice cams

asdf · Post by **asdf** » Wed Apr 15, 2009 6:50 am

Wow man, this looks done so right. Big thumbs up.

Devil Crx · Post by **Devil Crx** » Wed Apr 15, 2009 12:50 pm

JustRob;175465 wrote:The SC61 came in today

[/img]

Oh snap bitches!!!!:nervous: