why dont you use the head?N2HIFI;196505 wrote:what... no that thing is a pos it's in pieces and never ran right from the get go, the machine shop fucked up the block so without a over bore its junk
Project: HRDPKR
-
Capt'n Obvious
- Posts: 2973
- Joined: Fri Jun 22, 2007 4:11 pm
Project: HRDPKR
so far behind im ahead of the pack.
-
ryansDc5
- Posts: 1038
- Joined: Mon Aug 25, 2008 11:16 pm
Project: HRDPKR
Looks good, glad to see it running Chris. You guys did that shit quick, thanks for letting me come out and chill.
'05 NFR s2000
-
kra95civic
- Posts: 2484
- Joined: Tue Feb 13, 2007 3:50 am
Project: HRDPKR
well it only took about an hour and forty five minutes to drop it and take off all the parts. like Chris said once the swap has been done before it goes pretty fast.
You can talk shit all you want! eventually noone will care about your input. :yo:
-
N2HIFI
- Posts: 3349
- Joined: Fri Nov 17, 2006 6:22 am
Project: HRDPKR
I did now stop cluttering up my thread with this bs I clearly stated what I used and whymatt;196571 wrote:why dont you use the head?
-Chris

'Cause Internet Hating IS Serious Business
http://gmrn2hifi.wordpress.com/
http://www.garagement-racing.com/

'Cause Internet Hating IS Serious Business
http://gmrn2hifi.wordpress.com/
http://www.garagement-racing.com/
-
JustRob
- Posts: 7884
- Joined: Sat Nov 18, 2006 7:28 pm
Project: HRDPKR
More BS just because :PDT_Armataz_01_27:N2HIFI;196595 wrote:I did now stop cluttering up my thread with this bs I clearly stated what I used and why
[ame]www.youtube.com/watch?v=Q5im0Ssyyus[/ame]
Looks awesome, Chris. I'm glad you got it done fast. I can't wait to see the hatch get some attention now.
-
02Type-S
- Posts: 3513
- Joined: Thu Jan 17, 2008 10:21 pm
Project: HRDPKR
Looks great man!
I DETAIL CARS - PM ME
2002 Acura TL-S
A-Spec - BuddyClub - Rays - Falken - Cusco - K-Sport - SPC - Rotora - Injen - APEXi - Spoon - Mugen - Audiobahn
1998 Acura IntegraSkunk2 - Blox - Blackworks - Injen - DDM - Konig

Team Arsenic - Vice Pres.
2002 Acura TL-S
A-Spec - BuddyClub - Rays - Falken - Cusco - K-Sport - SPC - Rotora - Injen - APEXi - Spoon - Mugen - Audiobahn
1998 Acura IntegraSkunk2 - Blox - Blackworks - Injen - DDM - Konig

Team Arsenic - Vice Pres.
-
erittz
- Posts: 129
- Joined: Thu Jan 29, 2009 10:14 pm
Project: HRDPKR
yeah. i fail epicly and didnt look at the post date to realise this is the same civic you have now....i figured you got a new one for some reason that was all the same but had different plans, and the first page said you might get a backyard special front bumper. sorry about that.N2HIFI;196492 wrote:what?????? hello left feild
-
modthesol
- Posts: 3708
- Joined: Tue Nov 14, 2006 6:34 am
Project: HRDPKR
you still have some ordering to do.N2HIFI;130304 wrote:well i figure since i am starting with a clean slate and i like to show what i am always working on i figured i would put up a build thread of my new car.
Car: 1997 CPG EX 5-speed
Objective: My main goal for the car is to build a really nice DD that run's mid 14's rocks baller parts all while retaining all the OEM accessories like a/c, power steering and having a kick ass full custom stereo.
Motor: to start i am keeping the d16 for a while till i get my new motor built for it, but the end goal is a 12:1 180+hp b16 (i have pct pistons and a fully built head and a full b16 swap already)
Suspension: I had plans of buying D2 coilovers but after looking at the spring rates they wont work for what i want , i am going with what i know works for my needs AGX's and GC coilovers (i already have this set up on my EG and i love the ride). Going to be running Function7 LCA's, Bennen strut and tie bars, ASR rear brace, ITR sway bars and ES bushings.
Interior: Going to replace a few parts that are in poor shape due to the previous owner, and then upgrading some parts. Ordered a personal grinta 330m wheel with yellow stiching, NRG slim hub and quick release along with itr yellow stick shift boot already, i have my gray recaros from my EF hatch i will be putting in but for now i have crx Si seats. I will be redoing the cloth inserts on the doors in black suede and yellow stitching. Eventually i will be ordering Memory Fab S68 carbon kevlar seats to replace the recaros. I also already have a Mugen shift knob and B&M dual bend shifter for the car
Exterior: This is where i am at a toss up on which direction i want to go but for now i Ordered the H.O.P. ek4 sir lip from jdmland and am waiting on that to come in as well as my type R grill , debating on headlights and mirrors right now. I am planning on ordering CF hood and trunks, The car is getting new tint all the way around and i am removing the EX spoiler ASAP. I already replaced the red and amber tails with 00 civic SI tails which look so much better. I think eventually i will be getting a BYS bumper if i can find one new and the ordering a rear lip but we will see how the car looks after it's lowered and the lip is on. I also ordered the square amber style fogs .. ordered depo's .. eh who cares they are a disposable item so why waste ALOT of cash there when i need new headlights instead.
-
99BlackHatch
- Posts: 8654
- Joined: Thu Nov 09, 2006 5:45 am
Project: HRDPKR
What Jeff said...
I'm still a neighborhood ASSHOLE!
SquadronOne.net

- 1996.5 Black Acura 3.5RL - Kouki front end conversion coming... Wait. DID IT!
- 2004 Carbon Gray Pearl Acura 3.5RL - Slammed, JDM headlights, Navigation, other fun stuff
SquadronOne.net

- 1996.5 Black Acura 3.5RL - Kouki front end conversion coming... Wait. DID IT!
- 2004 Carbon Gray Pearl Acura 3.5RL - Slammed, JDM headlights, Navigation, other fun stuff
-
N2HIFI
- Posts: 3349
- Joined: Fri Nov 17, 2006 6:22 am
Project: HRDPKR
no your fine it's just been a while since i made that first post so i forgot that i had made mention of thinking about getting oneerittz;196616 wrote:yeah. i fail epicly and didnt look at the post date to realise this is the same civic you have now....i figured you got a new one for some reason that was all the same but had different plans, and the first page said you might get a backyard special front bumper. sorry about that.
lol piss off honda boy ... yea i have a bunch of parts i still want to get but i want a rb20 for the 240 first. I still want the bys bumper and cf spoiler and trunk ... these are things i will get when i sell the hatch next yearmodthesol;196622 wrote:you still have some ordering to do.
-Chris

'Cause Internet Hating IS Serious Business
http://gmrn2hifi.wordpress.com/
http://www.garagement-racing.com/

'Cause Internet Hating IS Serious Business
http://gmrn2hifi.wordpress.com/
http://www.garagement-racing.com/