stolle's new ride!

User avatar
99PreludeSh
Posts: 6921
Joined: Mon Nov 13, 2006 2:39 am

stolle's new ride!

Post by 99PreludeSh »

Those wheels are very simple and I like the look of them a lot.
Image
User avatar
stolle
Posts: 2241
Joined: Wed Nov 08, 2006 5:47 pm

stolle's new ride!

Post by stolle »

99preludesh;8364 wrote:Those wheels are very simple and I like the look of them a lot.
i like simple, if i do get them they will 16" so i can use the tires i have. im also looking at tein springs 1.5" drop i think those two things would really make this thing, hot fiya :Eyecrazy:
Team NOCO Crew Member #2
Image
User avatar
99PreludeSh
Posts: 6921
Joined: Mon Nov 13, 2006 2:39 am

stolle's new ride!

Post by 99PreludeSh »

stolle;8365 wrote:i like simple, if i do get them they will 16" so i can use the tires i have. im also looking at tein springs 1.5" drop i think those two things would really make this thing, hot fiya :Eyecrazy:

Yes im a big fan of simple as well and I think 17's may look a bit big no that for some reason so deffinetly 16's would look good.

I also have the tein lowering springs with the 1.9 in the front and 1.5 in the back. I like them a lot and with a nice set of koni yellows it would be a GREAT ride.
Image
User avatar
stolle
Posts: 2241
Joined: Wed Nov 08, 2006 5:47 pm

stolle's new ride!

Post by stolle »

99preludesh;8367 wrote:Yes im a big fan of simple as well and I think 17's may look a bit big no that for some reason so deffinetly 16's would look good.

I also have the tein lowering springs with the 1.9 in the front and 1.5 in the back. I like them a lot and with a nice set of koni yellows it would be a GREAT ride.
i dont want to go so low i cant use the factory struts, im not a fan of huge wheels 16's are fine for me. then again im prolly just gonna leave it stock for a long time at least till its out of warranty...
Team NOCO Crew Member #2
Image
User avatar
stolle
Posts: 2241
Joined: Wed Nov 08, 2006 5:47 pm

stolle's new ride!

Post by stolle »

ok, theres some things that have to be worked out. i just got back from the honda dealer cause my car pulled to the left and had a clunking noise i could see that the upper strut mount was bad, and it also ground 3rd gear. the good news, they are going to replace the 3rd gear syncro. the bad, it seems the person that had the car before i did had it lowered, for some reason they cut the tie rod ends around where the cotter pin secures the nut so theres no cotter pin holding the nuts on the tie rods; stupid why the hell would someone do that? needless to say honda isnt covering the tie rods or upper strut mount under warranty. not only that they must have had a body kit of some kind on it that they took off, when they put the stock stuff back on they didnt do a very good job so the side skirts are about falling off. this sucks, i can fix the suspension myself if the dealer i bought the car from refuses to fix it, they should fix it though it shouldnt have passed a safety inspection with the tie rods the way they are. im kicking myself i should have looked at the car more closely before bought it...errr...

cliff notes:
- bad upper strut mount and front tie rods not covered under warranty, because the car used to be lowered.

- bad 3rd gear syncro that is covered under warranty.

- basically some ******* took off all his aftermarket parts and put it back to stock, which is fine, but they could have at least done it right.
Team NOCO Crew Member #2
Image
User avatar
Waffles
Posts: 6876
Joined: Mon Dec 11, 2006 3:45 am

stolle's new ride!

Post by Waffles »

stolle;8613 wrote:ok, theres some things that have to be worked out. i just got back from the honda dealer cause my car pulled to the left and had a clunking noise i could see that the upper strut mount was bad, and it also ground 3rd gear. the good news, they are going to replace the 3rd gear syncro. the bad, it seems the person that had the car before i did had it lowered, for some reason they cut the tie rod ends around where the cotter pin secures the nut so theres no cotter pin holding the nuts on the tie rods; stupid why the hell would someone do that? needless to say honda isnt covering the tie rods or upper strut mount under warranty. not only that they must have had a body kit of some kind on it that they took off, when they put the stock stuff back on they didnt do a very good job so the side skirts are about falling off. this sucks, i can fix the suspension myself if the dealer i bought the car from refuses to fix it, they should fix it though it shouldnt have passed a safety inspection with the tie rods the way they are. im kicking myself i should have looked at the car more closely before bought it...errr...

cliff notes:
- bad upper strut mount and front tie rods not covered under warranty, because the car used to be lowered.

- bad 3rd gear syncro that is covered under warranty.

- basically some ******* took off all his aftermarket parts and put it back to stock, which is fine, but they could have at least done it right.
If you need a monkey to turn a wrench, give me a call I am going stir crazy since I am not working on my car.

EDIT: Was it a dealership that sold it to you?? And were they the ones who did the inspection, if so threaten to turn their ass in for a false inspection.
Image
User avatar
stolle
Posts: 2241
Joined: Wed Nov 08, 2006 5:47 pm

stolle's new ride!

Post by stolle »

btlfedgolf;8648 wrote:If you need a monkey to turn a wrench, give me a call I am going stir crazy since I am not working on my car.

EDIT: Was it a dealership that sold it to you?? And were they the ones who did the inspection, if so threaten to turn their ass in for a false inspection.
i just got back from the dealer i bought the car from, they made a copy of the paperwork that honda gave me and said they would give it to their general manager who comes in tomorrow at 8:30 and he would call me. i told them that the tech at honda said it shouldnt have pass inspection, of course they said that they had nothing to do with inspections and they send them out to inspected. im so pissed this is exactly the reason i didnt want a "new" car. i cant even go to the parts store and get parts they dont have them yet!! i need to fix the front end or its gonna end up fucking up the tires, damn it i feel like chokin a bitch, im trying to stay positive but i expected this kind of shit, its gonna be fixed eventually but damn i could have fixed the crx and saved myself a car payment... :mad2:
Team NOCO Crew Member #2
Image
User avatar
stolle
Posts: 2241
Joined: Wed Nov 08, 2006 5:47 pm

stolle's new ride!

Post by stolle »

haha, i have been lookin this car and its been molested pretty badly. my dads working on getting the previous owners registration so i can get in touch with him to see just what the hell he did to it :D. it looks like it was slammed at one point maybe a body kit, the headlights were blacked out the drivers side headlight has a big silver spot were they missed painting it :dunno: oh well its in good hands now, ill fixer up :lol:
Team NOCO Crew Member #2
Image
User avatar
SikofFalln
Posts: 1065
Joined: Tue Nov 28, 2006 6:50 am

stolle's new ride!

Post by SikofFalln »

Congrats man, the EPs are nice. I esp love thier seats!
User avatar
stolle
Posts: 2241
Joined: Wed Nov 08, 2006 5:47 pm

stolle's new ride!

Post by stolle »

SikofFalln;8833 wrote:Congrats man, the EPs are nice. I esp love thier seats!
thanks, i like the seats too...

i fixed the clunk in my front end woot now it just pulls to the left heres a not so good pic of what some ya-hoo did to the tie rod...

Image

the clunk was the 17mm nuts on top of the struts they were loose about hand tight!!! it doesnt pull near as bad and theres no noise from the front end anymore...
Team NOCO Crew Member #2
Image